Overview
The Trail Gear 304054 power steering hose kit supplies a #6 SAE 100R5 high pressure hose built to SAE J1402, with a rated working pressure of 2250 psi and a minimum bursting pressure of 9000 psi.
The hose is made from black, oil-resistant high-temperature NBR rubber, reinforced with high-tensile steel wire over a polyester braid. The outer cover is neoprene-impregnated oil-resistant polyester braid. It is a universal fit product, so the hose size and fittings must be matched to the vehicle.
Key features
- #6 SAE 100R5 construction to SAE J1402
- Black oil-resistant high-temperature NBR rubber tube
- High-tensile steel wire reinforcement over polyester braid
- Neoprene-impregnated oil-resistant polyester braid cover
- Rated for -40°F to +275°F
Choosing a replacement hose
A power steering pressure hose works under constant pump pressure and heat, so the inner tube, reinforcement and cover all matter. Wire reinforcement resists bulging, while the braided cover protects against abrasion from nearby parts. Hoses like this are often replaced together with their fittings when a leak appears at the crimp.
Before installing, confirm that the hose length allows full steering lock without rubbing. Keep it clear of exhaust heat and moving linkage, and check the routing against the original line. Replace any hose that shows bulges, cracks or oil seep at the ends, and do not run a pressure hose beyond its rated working pressure.
- Compare hose size and end fittings before cutting or bending
- Keep hoses clear of exhaust and sharp edges
- Check the system after a short drive for seepage
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 304054 |
| UPC | 700008283681 |
| Hose size | #6 SAE 100R5 |
| Standard | SAE J1402 |
| Working pressure rating | 2250 psi |
| Minimum burst pressure | 9000 psi |
| Temperature range | -40°F to +275°F |
Vehicle fitment
Match the #6 hose size and your fittings to the steering system before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the 2250 psi working pressure rating covers your system’s requirement before installing. Do not exceed the rated working pressure.
What’s included
The hose construction and ratings are covered here. Check the package for kit contents and fittings before installation.









