Overview
The Trail Gear Flatbed Kit 301047-KIT, also numbered TGI301047-KIT, is a headache rack and flatbed kit built from DOM tubing for the 1995-2004 Toyota Tacoma.
The kit keeps the utility of a flatbed while adding clearance for maneuvering in tight spaces. It is built from 1.75 inch O.D. x .120 wall DOM tubing on a CNC tube bender, with indented sides that reduce tire rubbing on the bed side, even with 40 inch tires and a rear link kit. The headache rack can be integrated into a future Exo cage, and the 1.5 inch O.D x .120 wall x 8 inch DOM tube sleeves allow it to be narrowed.
Trail Gear includes Chromoly Interlocking Tube Clamps so the kit can bolt on and off. The deck is not included, and the kit requires cutting, welding and minor fabrication skills, including cutting off the back of the frame.
Key features
- Flatbed kit with a headache rack
- 1.75 inch O.D. x .120 wall DOM tubing
- Indented sides to reduce tire rubbing
- Designed to integrate with a future Exo cage
- 1.5 inch O.D x .120 wall x 8 inch DOM tube sleeves
- Chromoly Interlocking Tube Clamps included
- Deck not included
Fabrication planning
A flatbed kit is a fabrication project, so plan the full build before cutting. Decide on the deck material and mounting points first, since the rack and deck must line up with the frame and bed. Measure twice, mark the cut lines clearly, and check the frame rails for damage before removing the rear section.
Protect bare welds and cut edges with primer or paint soon after fitting, because DOM steel rusts quickly outdoors. After the kit is bolted on, check the clamps and tube joints for movement, and inspect them after every rough trail run.
- Plan the deck and mounting points first
- Protect welds and cut edges promptly
- Check frame rails before cutting
- Inspect clamps after rough trail runs
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 301047-KIT |
| UPC | 700007246171 |
| Product type | Flatbed kit (headache rack) |
| Alternate part number | TGI301047-KIT |
| Main tubing | 1.75 inch O.D. x .120 wall DOM |
| Sleeves | 1.5 inch O.D x .120 wall x 8 inch DOM tube sleeves |
| Clamps | Chromoly Interlocking Tube Clamps |
| Design feature | Indented sides |
| Fit type | Direct fit |
| Installation skills | Cutting, welding and minor fabrication |
Vehicle fitment
It fits the 1995-2004 Toyota Tacoma built in those years.
- 1995–2004 Toyota Tacoma (Base, Limited, Pre Runner, S-Runner, SR5)
It fits only the 1995-2004 Toyota Tacoma. Later Tacoma generations and other Toyota trucks are not covered, so confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
This kit requires cutting, welding and minor fabrication skills, and it requires cutting off the back of your frame, so it is a fabrication project rather than a bolt-on. The clamps let the finished kit bolt on and off, and the builder can narrow the headache rack to fit behind the cab with the sleeves.
What’s included
The kit includes the headache rack tubing, 1.5 inch O.D x .120 wall x 8 inch DOM tube sleeves and Chromoly Interlocking Tube Clamps.
Not included: The deck is not included.












