Overview
The Trail Gear Ram Clamp, part number 300792-KIT, is a tubing clamp with a polished aluminum body and a weldable mount. It has a 2.5 in. ID and comes with 1/2 in. zinc-plated hardware. Trail Gear presents it as universal fit, so it is not tied to a specific vehicle, but the clamp size and mount still need to suit your build.
Choosing a ram clamp setup
A ram clamp holds a tube so a mount or accessory stays put, and its inside diameter has to match the tube’s outside diameter closely. Measure the tube before you commit, and think about the load the tube will carry, since a clamp that grips loosely can slip under weight. Polished aluminum resists surface corrosion well, but the weld area still needs care.
Before welding, remove paint, rust and grease from the mounting spot and the clamp base. Weld in short passes to limit heat distortion, and let the joint cool before loading it. After the first few trail runs, check the clamp body and the weld for cracks, and recheck the hardware for tightness.
- Measure the tube’s outside diameter first
- Clean paint and rust from the weld area
- Inspect the weld after each rough trip
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 300792-KIT |
| UPC | 70000667146 |
| Material | Polished aluminum |
| Mount | Weldable |
| ID | 2.5 in. |
| Hardware | 1/2 in. zinc-plated |
Vehicle fitment
The clamp is universal, so it is not tied to one vehicle. Make sure the 2.5 in. ID suits the tube you plan to clamp, and settle the mounting location before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mount is weldable, so this clamp is set up for welding to the mounting location rather than bolting on.
What’s included
Hardware included: 1/2 in. zinc-plated hardware.









