Overview
The Trail Gear 9/16 inch creeper joint kit, part number TGI303893-KIT, is a weld-on joint for building custom suspension components. It is intended for making A-arms, suspension links and similar parts, and it is supplied unassembled. Welding is required for installation.
The inner flex ball is made from 8620 tool steel and rides on polyurethane bushings, with heavy-duty hardened steel washers holding the joint together. The joint allows up to 40 degrees of movement when used with spacers. A threaded grease fitting on the housing provides lubrication, and the flex ball is drilled for cross-lubrication flow from the shell to the link mount bolt.
Key features
- Weld-on creeper joint design
- Inner flex ball of 8620 tool steel
- Polyurethane bushings and hardened steel washers
- Up to 40 degrees of movement when used with spacers
- Threaded grease fitting on the housing
- Supplied unassembled
Welding and joint layout
A creeper joint lets a link articulate in more than one direction, which helps a fabricated arm follow wheel travel without binding the bushing. Its useful range depends on how the spacers and mounting points are arranged, so plan the geometry on paper before cutting the tubing. Keep the joint centered in the link so the flex ball is not forced against the housing at full travel.
Welding a joint into a finished part changes the metal properties near the seam, so use a welding procedure suited to the steel and joint housing. Keep heat away from the polyurethane bushings and the grease fitting, and let the assembly cool before final assembly. Grease the joint after installation and again at routine service intervals.
- Test-fit the assembly before final welding
- Keep the grease fitting accessible after the build
- Check the joint for play after the first trail runs
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI303893-KIT |
| Size | 9/16 inch |
| Joint type | Weld-on creeper joint |
| Flex ball | 8620 tool steel |
| Bushings | Polyurethane |
| Maximum movement | Up to 40 degrees with spacers |
| Supplied | Unassembled |
Vehicle fitment
The kit is universal in fitment and is not tied to a specific vehicle, year or chassis. The vehicle depends on the part you build with it.
Confirm your vehicle’s year, model and trim before ordering, and confirm the component’s dimensions before welding.
Installation notes
The joint must be welded into a finished part, and the kit arrives unassembled. Confirm the weld location and the joint’s clearance before final assembly.
What’s included
One 9/16 inch weld-on creeper joint kit, provided unassembled, part number TGI303893-KIT.










