Overview
The Trail Gear 301337-1-KIT is an adapter ring that allows the Trail-Gear rear disc brake kit to be used on 79-85 rear axles. It is CNC laser cut from 1/8 inch thick steel and is included in the Rear Disc Brake Kit, P/N 140250-1-KIT.
The ring is also available separately for spare rear axle shafts. Trail Gear names 79-85 Toyota Pickups and 84-85 4Runners for it.
Key features
- Allows Trail-Gear rear disc brake kit use on 79-85 rear axles
- CNC laser cut from 1/8 inch thick steel
- Included in Rear Disc Brake Kit P/N 140250-1-KIT
- Available separately for spare rear axle shafts
Installing the adapter ring
An adapter ring positions the mounting surface so the rotor and caliper line up with the axle shaft. Before fitting it, clean the mating faces and check for burrs from the laser cut edges. Set the ring on a flat surface and look for any warp, since a raised spot can change how the rotor sits and cause runout.
Rear disc conversions often bring related parts into play. Shafts, bearings, seals and brake lines may be worn or the wrong length once the axle is opened. Inspect each one during the job and replace anything worn before reassembly. Keep fasteners sorted by location so nothing is mixed up, and re-check lug torque after the first drive, since new fasteners can settle.
- Deburr ring edges before assembly
- Inspect axle seals while the axle is open
- Use fresh bearings when the hub is apart
- Check brake line routing before bleeding
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 301337-1-KIT |
| UPC | 700007208741 |
| Position | Rear |
| Material | Steel |
| Thickness | 1/8 inch |
Vehicle fitment
It is made for 79-85 rear axles, 79-85 Toyota Pickups and 84-85 4Runners. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One adapter ring.
Not included: The Trail-Gear Rear Disc Brake Kit (P/N 140250-1-KIT) and other kit parts.









