Overview
The Trail Gear 301693-2-KIT is a Longfield spindle bushing made of Teflon and identified for the Dana 60 axle. Trail Gear labels the fit as universal, and it names no vehicle or year.
A spindle bushing is a sleeve that supports the spindle inside the axle assembly. Dana 60 names an axle, not a vehicle, so the axle type is the main fit check.
Spindle bushing care
A spindle bushing sits between the spindle and its housing and lets the spindle turn with little friction. Teflon is a low-friction material, so the bushing can run smoothly when the surfaces are clean and correctly lubricated. Wear usually shows up as play in the spindle or a faint tick as the wheel turns, and the bushing and spindle surfaces should be inspected together.
When the spindle is apart, clean the bore and check for scoring or grooves that could cause the bushing to spin. Use a light grease suited to the spindle assembly at installation, and keep the seals intact so grit does not reach the bushing surface. Fit the bushing evenly so it sits square in its seat.
- Clean the bore and check for scoring
- Apply a light grease suited to the spindle
- Keep seals intact to keep grit away from the bushing
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 301693-2-KIT |
| UPC | 700006929961 |
| Axle application | Dana 60 |
| Material | Teflon |
Vehicle fitment
Check your axle type and spindle fit for your vehicle’s year and trim before ordering. Dana 60 is an axle designation, so the axle type is the main fit check.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One Longfield spindle bushing is named. No other contents are described.









