Currie
Showing 97–144 of 145 resultsSorted by popularity
-
-
-
Driveshaft Flange Yoke
Currie 8.8 Inch Ford 1310 Pinion Flange – 88-CF10
- Currie 88-CF10 is a 1310 series companion flange style pinion yoke for stock 8.8 inch Ford car and truck rear-ends
- Eight threaded holes on an 8 on 3 1/2 inch bolt circle, 12mm x 1.75 pitch
- Confirm vehicle years, models and trims before ordering.
SKU: CUR88-CF10 -
Differential Pinion Yoke
Currie Pinion Yoke – 60-1350
- Currie 60-1350 pinion yoke for Dana 60 axles, designed to run the 1350 series U-joint
- Fits Dana 70 and Dana 61 axles in the front or rear location
- Part number 60-1350, UPC 70000201131
- No vehicle fitment listed; confirm your axle type before ordering
SKU: CUR60-1350 -
Differential Covers
Currie Rockjock 60/70 Iron Diff Cover – 60-1005CTR
- Currie Rockjock 60/70 iron differential cover, part 60-1005CTR
- Cast iron, powder coated, named for Dana 50 axles at front and rear locations
- Designed to stiffen the axle housing around the differential
- No vehicle models are named; confirm the Dana 50 axle before buying
SKU: CUR60-1005CTR -
Differential Covers
Currie Rockjock 60/70 Iron Diff Cover – 60-1005CTB
- Currie Rockjock 60/70 iron differential cover, part 60-1005CTB
- Cast iron with a powder coated finish, named for Dana 60 axles at front and rear locations
- Built to guard the differential and reinforce the axle housing
- No vehicle years or models are listed, so match the axle type first
SKU: CUR60-1005CTB -
-
-
Dana 44 Differential Covers
Currie Rockjock 44 Iron Diff Cover – 44-1005CTB
- Currie Rockjock 44 cast iron differential cover 44-1005CTB
- Built for Dana 44 axles at front and rear locations
- Gasketed fill plug with dipstick and socket head allen hardware
- Cover gasket included; UPC 70000694973
SKU: CUR44-1005CTB -
-
Jam Nuts
Currie 1.25 Inch -12 LH Jam Nut – CE-9114LJN
- Currie 1.25 Inch -12 left hand jam nut, CE-9114LJN
- 1-1/4 Inches – 12 fine thread with silver zinc plating
- Universal application for threaded joints and other 1.25 inch jam nut uses.
- Made for Currie CE-9114 Johnny Joints with threaded shanks
SKU: CURCE-9114LJN -
-
Flex Joints
Currie 2.5 Inch Forged Johnny Joint with 1-1/4 Inch RH Threaded Stud – CE-9114-14
- Currie CE-9114-14 forged Johnny Joint, 2 1/2 in.
- 1 1/4 in-12 right-hand threaded shank for Johnny Joint stud builds
- 2.365 in. mounting width
- Externally greased, sold without bolt
- Gold zinc plating, sold each
SKU: CURCE-9114-14 -
Flex Joints
Currie 2.5 Inch Johnny Joint – CE-9110
- Currie CE-9110 2-1/2 inch Johnny Joint rod end, internally greased through a supplied greasable bolt
- 2.625 inch mounting width and 9/16 inch thru-bolt hole
- Must be welded on; urethane bushings and DOM outer shell
- Greasable bolt, nut and washers included; universal fit
SKU: CURCE-9110 -
-
Flex Joints
Currie 2.5 Inch Johnny Joint – CE-9110P
- Currie CE-9110P 2-1/2 inch Johnny Joint rod end for weld-on fabrication
- 2.625 inch mounting width and 9/16 inch thru-bolt hole
- Urethane bushings, heat-treated steel center ball and DOM outer shell
- Bolt and nut not included; universal fit, no vehicle fitment is listed
SKU: CURCE-9110P -
Motor Mount
Currie 1 Inch Motor Mount Lift – CE-9200
- Currie 1 inch motor mount lift, model CE-9200
- Heavy duty construction with large diameter urethane inserts to absorb vibration
- Black powder coated finish
- Includes all necessary mounting hardware
- Product information lists Universal Fit
SKU: CURCE-9200 -
Steering Upgrades and Drag Links
Currie Currectlync Heavy-Duty Drag Link – CE-9701DLO
- Currie CE-9701DLO heavy-duty drag link, link only
- Forged 1-1/4 inch alloy steel with 1-1/8 inch threaded adjuster
- Replacement for the Currie Currectlync system only, not for use with stock tie rods
- Currie rates it up to 200% stronger than original equipment
SKU: CURCE-9701DLO -
Flex Joints
Currie Johnny Joint Front End Housing Kit – CE-9102K
- Currie CE-9102K front end housing kit for 1991 to 2001 Jeep Cherokee (XJ)
- Mounts 2-inch Johnny Joints in place of the upper control arm bushings
- Includes a Johnny Joint insert, installation tool and greasable hardware
- Requires cutting and welding equipment; minor welding required
SKU: CURCE-9102K -
-
-
-
Flex Joints
Currie 2.5 Inch Forged Johnny Joint with 1-1/4 Inch LH Threaded Stud – CE-9114L
- Currie CE-9114L forged Johnny Joint rod end with a 1-1/4 inch left-hand threaded stud
- 2-1/2 inch outside diameter and 2.625 inch mounting width
- 9/16 inch thru-bolt hole, urethane bushings and gold zinc finish
- Universal fit for Currie adjustable upper control arms and custom arm builds
SKU: CURCE-9114L -
Steering Upgrades and Drag Links
Currie Currectlync Heavy Duty Drag Link – JK-9703DL
- Currie Currectlync Heavy Duty Drag Link, model JK-9703DL
- Heavy duty steering drag link in the Steering Upgrades and Drag Links category
- Fitment not listed; check manufacturer specifications
- UPC 70000662440
SKU: CURJK-9703DL -
Flex Joints
Currie 2.5 Inch Forged Johnny Joint with 1-1/4 Inch RH Threaded Stud – CE-9114
- Currie CE-9114 forged Johnny Joint rod end with a 1-1/4 inch right-hand threaded stud
- 2.625 inch mounting width and 9/16 inch thru-bolt hole
- Urethane bushings, externally greasable through a zerk fitting, fully rebuildable
- Universal fit for Currie adjustable lower arms and custom builds
SKU: CURCE-9114 -














































