Overview
The Currie CE-9900JKR is an Antirock rear sway bar kit for Jeep vehicles, a complete bolt-on replacement for the stock rear sway bar. The title model number is CE-9900JKR. No model years or chassis code are given, so no specific Jeep is named for this kit.
The rear Antirock kit is designed to be used alongside a front Antirock sway bar kit, balancing performance across the front and rear suspension on rugged off-road terrain. It spreads weight and traction over all four tires. The bar bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the axle housing. It does not need to be disconnected for off-road driving. Jeeps fitted with it will have more body roll than stock, and street handling will not match the stock setup.
Key features
- Designed to directly replace the stock Jeep rear sway bar
- Bar made from SAE 4130 heat treated steel, which Currie says matches professional off-road competition bars
- Semi-gloss black powder coated bolt-on steel frame brackets
- Delrin bushings and semi-gloss black powder coated arms
- Adjustable length heim jointed sway bar links
- Long travel stainless braided brake lines relocate the brake line inboard of the frame for arm clearance
Rear suspension and brake lines
The rear sway bar works with the rear axle and springs, so the position of the bar arms and their clearance under the frame matter. As the axle travels up and down, the arms swing through an arc, and tight clearance can cause contact with the frame, brake parts or the driveshaft. Measuring clearance at full suspension compression helps catch problems before they damage hoses or lines.
Brake line routing changes when a bar is installed, so inspect the lines after mounting and again after the first few drives. Look for kinks, chafing and clearance from moving parts. Rear bars are often replaced along with their bushings and links, since those parts wear at the same rate under off-road use and carry the same loads.
- Check brake line clearance at full travel
- Inspect bushings and links together
- Re-check arm clearance after the first trail run
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9900JKR |
| UPC | 70000498019 |
| Bar material | SAE 4130 heat treated steel |
| Finish | Semi-gloss black powder coat |
| Bushings | Delrin |
| Links | Adjustable length, heim jointed |
| Brake lines | Long travel stainless braided |
| Mounting location | Rear |
| Spring rate type | Single rate |
| Type | Automatic |
| Fitment | Direct fit |
Vehicle fitment
This kit is for Jeep vehicles. Confirm fit for your Jeep’s year, model and rear axle before ordering.
The rear Antirock kit is a separate product from the front Antirock kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The frame brackets mount in existing holes in the frame rail, so no drilling is described. The kit reroutes the brake lines inboard of the frame for sway bar arm clearance. Check that the brake lines clear the arms and the frame before driving.
What’s included
Sway bar, semi-gloss black powder coated bolt-on steel frame brackets, Delrin bushings, semi-gloss black powder coated arms, adjustable length heim jointed sway bar links, long travel stainless braided brake lines, necessary hardware, and step-by-step instructions.









