Overview
The Currie CE-9114BL is a left hand thread weld-in bung for use with forged Johnny Joint rod ends or any other 1 1/4-inch thread rod end. It is made from CNC machined steel and is sized as a universal fit.
The bung has 2-1/2″ of 1-1/4″-12 left hand threads and is hex shaped rather than round for ease of bar adjustment. It fits inside a 1-1/2″ I.D. tube at minimum and must be welded in place. A custom machined jam nut of the same hex size is included.
The part is sold individually.
Key features
- Weld-in threaded bung
- 1-1/4″-12 left hand thread, 2-1/2″ of threads
- Hex shaped for ease of bar adjustment
- Includes a custom jam nut of the same hex size
- Fits inside a 1-1/2″ I.D. tube at minimum
- CNC machined steel construction
- For Johnny Joint rod ends or any 1 1/4″ thread rod end
Choosing a rod end and tube
A threaded bung is only as good as the joint it supports, so match the rod end before you cut or weld anything. Johnny Joint ends and other 1 1/4-inch thread rod ends use the same thread size, but the thread direction and the length of engagement decide whether the rod end will seat correctly. Measure the tube inside diameter at the weld location and confirm the tube wall is sound, since thin or corroded tube can distort under load.
Plan the bar and bung layout before welding, so the hex shape can be turned for adjustment without binding. Use clean, bare metal at the joint, and weld the bung square to the tube so the threads run true. After welding, check the threads for distortion and clear any spatter before fitting the rod end. Recheck the jam nut after the first few drives and inspect the weld for cracks during routine service.
- Measure the tube inside diameter before ordering
- Confirm left hand thread on both parts
- Inspect the weld after the first off-road outing
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9114BL |
| UPC | 70000411122 |
| Product type | Threaded weld-in bung with jam nut |
| Thread size | 1-1/4 Inches -12 |
| Thread direction | Left hand |
| Thread length | 2-1/2″ |
| Minimum tube ID | 1-1/2 Inches |
| Material | CNC machined steel |
| Jam nut | Included |
| Installation | Must be welded |
| Fit type | Universal fit |
Vehicle fitment
It is sized by thread and tube size rather than for a particular vehicle, so match the thread and tube to your build.
Check that your tube has at least a 1-1/2″ I.D. and that your rod end uses a 1-1/4″-12 left hand thread. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Weld the bung in place using the thread and tube details above, and follow sound welding practice for the tube material.
- Confirm the thread direction and tube size match what you are fitting before you begin.
- Retighten the jam nut after the first drive.
- Have a professional do it if welding or fitting is unfamiliar.
What’s included
- Threaded bung
- Custom machined jam nut








