Overview
The Currie CE-9900JKF is an Antirock front sway bar system that replaces the stock Jeep front sway bar on 2- and 4-door models. It is designed to balance the suspension for rugged off-road conditions and to distribute weight across all four tires.
The bar is made of SAE 4130 heat treated steel. The kit includes steel arms, bolt-on frame brackets, Delrin bushings and adjustable length heim jointed links. The bar does not need to be disconnected for off-road use. A Jeep fitted with this bar will have more body roll than stock, and it can be used on the street but will not match the performance of the stock setup.
Key features
- SAE 4130 heat treated steel sway bar
- Steel arms with semi-gloss black powder coat
- Bolt-on frame mount brackets with semi-gloss black powder coat
- Adjustable length heim jointed sway bar links
- Delrin bushings
- Stays connected for off-road use
- Designed to directly replace the stock Jeep sway bar
Sway bar tradeoffs
A front sway bar resists body roll in corners by linking the two front wheels through the axle, so a stiffer bar reduces lean but changes how the front tires share load. On a vehicle used mostly on pavement, this trade-off shows up in the ride, while on trails the bar’s effect on axle articulation matters more. Those are the main factors to weigh before deciding how much bar a truck needs.
Heim jointed links and Delrin bushings need periodic inspection. Look for play in the joints, cracked or hardened bushings and any binding when the suspension cycles. Keep the link ends clean and check them after hard off-road use, since debris can wear the joints faster than normal road driving would. Decide how the bar will be used before your first trail trip.
- Inspect links for play after trail use
- Check bushings for cracks or hardening
- Confirm brackets are tight after installation
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9900JKF |
| UPC | 70000443843 |
| Product type | Antirock front sway bar system |
| Sway bar material | SAE 4130 heat treated steel |
| Arms | Steel, semi-gloss black powder coated |
| Frame mount brackets | Bolt-on, semi-gloss black powder coated |
| Bushings | Delrin |
| Links | Adjustable length, heim jointed |
| Spring rate type | Single rate |
| Mounting location | Front |
| Mounting | Direct fit, front |
| Hardware | Necessary hardware included |
Vehicle fitment
It replaces the stock Jeep front sway bar on 2- and 4-door models and bolts into the existing holes in the frame rail and the stock mounts on the axle housing. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bar bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the axle housing. Step-by-step instructions are included with the kit. Drive cautiously after installation, since body roll will be greater than stock.
What’s included
The kit includes the sway bar, steel arms, semi-gloss black powder coated bolt-on frame brackets, Delrin bushings, adjustable length heim jointed sway bar links, the necessary hardware, and step-by-step instructions.









