Overview
The Currie CE-9114LJN is a left hand jam nut in a 1-1/4 Inches – 12 fine thread, finished in silver zinc plate. It is made for Currie CE-9114 Johnny Joints with threaded shanks, and for any other application that needs a 1.25 inch jam nut.
It is a universal application fastener for a threaded joint, so match the thread size and direction to the joint before fitting.
Key features
- Left hand, fine thread, 1-1/4 Inches – 12
- Silver zinc plated finish
- Universal application
- Made for Currie CE-9114 Johnny Joints with threaded shanks
- Also suits other applications needing a 1.25 inch jam nut
Jam nuts and locking threads
A jam nut works by pressing against a joint or rod end after the length is set, so the joint cannot turn out of adjustment. It needs clean, undamaged threads to seat properly, and the fit should be snug rather than forced. Before tightening, make sure the nut is threaded onto the shank in the right direction and that it sits square on the housing.
On a Johnny Joint, the nut locks the threaded shank once set, so the joint length stays where you put it. Inspect the nut and threads after each trip and clean off grit or mud that can prevent the nut from seating. Replacing a nut that shows burrs or deformation is cheap insurance against a joint working loose on the trail. Keep a spare nut in your kit for remote routes.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9114LJN |
| UPC | 70000317323 |
| Thread size | 1-1/4 Inches – 12 |
| Thread direction | Left Hand |
| Thread type | Fine |
| Finish | Silver zinc plated |
| Application | Universal |
Vehicle fitment
It is a universal application jam nut, so it is not tied to a particular vehicle. Use it on a threaded shank that matches the 1-1/4 Inches – 12 thread.
Confirm the thread size and direction on your joint before fitting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is intended for the threaded shank of a Currie CE-9114 Johnny Joint, where it locks the joint once set to length.
What’s included
One left hand jam nut.
Not included: The threaded joint or shank the nut is used with.








