Overview
The Currie CE-9900TJR is a complete rear Antirock sway bar system for the Jeep TJ and LJ Wrangler, with a 44-inch sway bar. The kit is bolt-on except for the housing tabs, which must be welded to the rear axle housing.
This is a complete rear Antirock system for TJ and LJ Wranglers. It uses semi-gloss black powder coated bolt-on frame brackets, sway bar bushings and adjustable heim jointed sway bar links. The axle housing tabs are weld-on. The kit includes the necessary hardware and detailed instructions. Installation needs minor welding of the housing tabs and trimming of the rear inner wheel wells so the sway bar arms can travel.
Key features
- Complete rear sway bar system for TJ and LJ Wranglers
- 44-inch sway bar
- Semi-gloss black powder coated bolt-on frame brackets
- Adjustable heim jointed sway bar links
- Weld-on housing tabs for axle attachment
- Sway bar bushings and all necessary hardware
Welding and axle attachment
Because the housing tabs are weld-on, the axle attachment is the most important step in this installation. Welds on axle housing need clean metal, correct heat and careful placement so the tabs carry load without cracking. Work done by someone without welding experience on a rear axle can weaken the housing, so the job should be planned carefully.
Trimming the rear inner wheel wells gives the sway bar arms room to travel through their full range. Check clearance with the tires turned and the suspension at full compression before final tightening. After installation, inspect the welds and the bracket hardware after the first drives, and recheck clearance around the tires and arms.
- Use a qualified welder for the axle housing tabs
- Check arm clearance at full compression
- Inspect welds and hardware after first drives
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9900TJR |
| UPC | 70000513137 |
| Sway bar length | 44 inch |
| Finish | Semi-gloss black powder coat (brackets) |
| Frame attachment | Bolt-on frame brackets |
| Axle attachment | Weld-on housing tabs |
| Links | Adjustable, heim jointed |
| Mounting location | Rear |
| Spring rate type | Single rate |
| Type | Automatic |
Vehicle fitment
It fits the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Jeep Wrangler (LJ).
It does not fit the Wrangler JK, JL or Gladiator. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required to attach the housing tabs, and the rear inner wheel wells must be trimmed for sway bar arm travel. Detailed instructions are included. Have the welds on the axle housing checked by a qualified welder before driving.
What’s included
44-inch sway bar, semi-gloss black powder coated bolt-on frame brackets, sway bar bushings, adjustable heim jointed sway bar links, weld-on housing tabs, all necessary hardware and detailed instructions.
Not included: Welding and wheel well trimming, which installation requires.









