Overview
The Currie Antirock Sway Bar Kit CE-9900 is a front sway bar kit for the 1997-2006 Jeep Wrangler TJ. It is designed to replace the stock Jeep sway bar, also called an anti-roll bar, with a bar that balances the front and rear suspension for rugged off-road conditions.
The bar is made of SAE 4130 heat-treated steel. The kit includes its own bushings, hardware and step-by-step installation instructions, so everything needed is in one package. It is designed to balance and distribute weight over all four tires for traction.
Key features
- Replaces the stock Jeep sway bar with a bar designed for off-road use
- SAE 4130 heat-treated steel construction.
- Balances front and rear suspension and distributes weight over all four tires for traction
- Bushings and hardware included with the kit
- Step-by-step installation instructions included
- Does not need to be disconnected for off-road use
- Single rate spring rate type with direct fit mounting
Front sway bar upkeep
A front sway bar on a Wrangler TJ works through its bushings, links and mounts, and those parts see most of the wear. Because the bar is tied into the front axle, worn mounts can change how the front end feels on rough roads and during turns. Checking the mounting points and bushings at each service keeps the bar doing its job.
Bushings should be inspected for cracks, flattening and looseness, and any play at the mounts should be addressed promptly. Keep the bar clear of debris when driving off-road, and avoid letting mud build up around the bushings. After the first few drives on a newly installed bar, retighten the mounting hardware and recheck the clearance around the steering components.
- Inspect bushings for cracks or flattening
- Check mounts for play after rough trails
- Recheck hardware after the first drives
Specifications
| Brand | Currie |
|---|---|
| Model number | CE-9900 |
| UPC | 52070700001 |
| Material | SAE 4130 heat-treated steel |
| Mounting location | Front |
| Spring rate type | Single rate |
| Fitment type | Direct fit |
| Included | Bushings, hardware, step-by-step installation instructions |
Vehicle fitment
This kit fits the 1997-2006 Jeep Wrangler TJ. It positions through the front cross member and attaches to the stock mounts on the axle housing.
The kit is written for the TJ generation only and does not cover the Jeep Wrangler LJ, JK or JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bar does not need to be disconnected for off-road use. Jeeps fitted with it have more body roll than stock, and on the street it will not match the performance of the stock setup. Support the vehicle on jack stands rather than a jack alone while mounting the bar.
What’s included
The kit includes all necessary components, bushings, hardware and step-by-step installation instructions.




































