Overview
The Currie CE-9114L is a 2-1/2 inch forged Johnny Joint rod end with a 1-1/4 inch left-hand threaded stud, intended for Currie adjustable upper control arms and for universal builds. The left-hand thread is the main difference from the CE-9114, which uses a right-hand stud.
The joint carries urethane bushings and a 9/16 inch thru-bolt hole in a 2.625 inch mounting width, with Johnny Joint internals installed. It has a gold zinc plated finish and can be greased through the outer shell. Confirm the stud and bolt-hole dimensions against your arm before ordering.
Key features
- Forged steel rod end with a 2-1/2 inch outside diameter
- Left-hand 1-1/4 inch-12 threaded stud
- The stud carries 3-1/4 inch of threads.
- Urethane bushings with Johnny Joint internals
- Greasable through the outer shell
- Gold zinc plated finish
- Suited to Currie adjustable upper control arms and custom arm builds
Left-hand vs. right-hand studs
Thread direction is easy to overlook when buying a joint, but it determines which side of an arm the stud can go into. Left-hand and right-hand studs are not interchangeable, so the thread on the joint must match the arm’s threaded bore before any assembly. Checking this early avoids forcing a stud into the wrong side, which can strip threads.
Because upper control arms often mount on the opposite side of the vehicle from lower arms, the thread direction can differ between joints on the same build. Keep a note of which joints are left-hand, and label them as you fit them. Inspect the threads and the jam nut after the first few drives, since a loose nut or worn threads will show up as play at the joint.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9114L |
| UPC | 70000274002 |
| Outside diameter | 2-1/2 inch |
| Mounting width | 2.625 inch |
| Thru-bolt hole | 9/16 inch |
| Threaded stud | 1-1/4 inch-12, left hand |
| Thread length | 3-1/4 inch |
| Bushings | Urethane |
| Construction | Forged steel |
| Finish | Gold zinc plating |
Vehicle fitment
It is universal fit and suited to any Currie adjustable upper control arm or universal arm build.
Match the left-hand 1-1/4 inch-12 stud, 2.625 inch mounting width and bolt hole to your arm. Check those dimensions yourself before ordering, and confirm fit for your vehicle’s year, model and trim.
What’s included
One forged Johnny Joint rod end with a left-hand 1-1/4 inch threaded stud and Johnny Joint internals.
Not included: greasable thru bolts, which are available separately.









