Overview
The Currie CE-9031D is a pair of heavy duty spring plates for leaf spring axles, with a built-on skid plate that protects the U-bolts. Currie describes them as universal fit, designed for 2 inch wide springs, and built for rugged off-road use. No specific vehicle is named.
Key features
- Built-on skid plate that protects the U-bolts
- Top plate of 5/16 inch steel
- Bolt-on, replaceable shock mounts
- Designed for 2 inch wide springs
Preparing the spring for plates
Spring plates clamp the leaf spring to the axle, so the plate, U-bolts and spring pack all share the load. Before installing, measure the spring width and confirm it matches the plate design, since a mismatch can leave the clamp uneven and stress the spring. Clean the spring and axle seat of rust and mud so the plate sits flat. The built-on skid plate sits under the axle area and protects the U-bolts from rocks, so check that it clears the axle housing and the brake lines after assembly. Shock mounts that bolt on can be swapped later without replacing the whole plate, which helps when shock brands change. After the first few drives, recheck the U-bolt nuts and the shock mount fasteners, because clamps often settle once the spring is seated.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9031D |
| UPC | 70000328951 |
| Top plate | 5/16 inch steel |
| Skid plate | 1/4 inch steel, stamped |
| Spring width | 2 inch wide springs |
| Shock mounts | Bolt-on, replaceable |
| Quantity | Sold as a pair |
Vehicle fitment
It is a universal fit for 2 inch wide springs. Match your spring width and U-bolt setup before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock mounts bolt on and can be replaced. Check that the spring width is 2 inch before installing, since that is the design size Currie gives.
What’s included
A pair of spring plates with built-on skid plates and bolt-on shock mounts.









