Overview
The Currie CE-7111 is a pair of front lower control arm brackets for Jeep TJ, LJ, XJ and MJ models. Currie describes them as heavy duty brackets, laser cut and folded from one piece of 3/16 inch steel and radiused to fit a 3 inch tube.
They are weld-on mounts rather than bolt-on parts, and they do not retain factory style cam bolts. They can be ground to fit tube diameters other than 3 inches.
Key features
- Laser cut and folded from one piece of 3/16 inch steel
- Radiused to fit a 3 inch tube
- Can be ground to fit other tube diameters
- Weld-on installation
- Does not retain factory style cam bolts
- Sold as a pair
Welding and fit considerations
Weld-on control arm brackets change how the axle and frame are joined, so the work deserves planning before the first bead. Fit the brackets dry against the tube, check the arm’s pivot position, and confirm the arm will clear the tire, frame and brake lines at full travel.
Thin steel is easy to overheat, so use short weld passes and let the metal cool between them. Clean the weld area to bare metal, and check the finished welds for undercut or cracks before the vehicle goes back into service. Grinding the radius for a different tube adds time, so measure first.
Factory cam bolts are not retained with this design, so plan the alignment setup around the new mount. Some owners add an alignment check after welding to confirm caster and pinion angle are within the range the vehicle needs.
- Test fit before striking an arc
- Check welds for cracks after first use
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-7111 |
| UPC | 70000224899 |
| Material | 3/16 inch steel |
| Tube diameter | 3 inches (radiused; other diameters by grinding) |
| Installation | Weld-on |
| Sold as | Pair |
| Type | Control arm mount |
Vehicle fitment
They fit TJ, LJ, XJ and MJ Jeeps: Wrangler TJ 1997-2006, Wrangler LJ 2004-2006, Cherokee XJ 1984-2001 and Comanche MJ 1986-1992.
Other Wrangler generations (YJ, JK, JL) and Grand Cherokee models do not fit these brackets. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires welding, so these are not bolt-on brackets. Grinding may be needed to fit tube diameters other than 3 inches. Welding suspension mounts is work for an experienced welder.
What’s included
A pair of front lower control arm brackets.
Not included: Control arms, axles and welding supplies are not included.










