Select your vehicle

Currie Machined Johnny Joint – CE-9112M2

Currie

Shop Currie Flex Joints on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Machined Johnny Joint with 1/2 in. bolt-fit housing
  • Made for custom suspension fabrication
  • Universal fit; not tied to a specific vehicle.

Description

Overview

The Currie CE-9112M2 is a machined Johnny Joint with a 1/2 in. bolt-fit housing, made for fabricators who build their own suspension components. It is a universal fit, so no vehicle is covered.

Joint size, angle and load capacity are not known for this part. The 1/2 in. bolt-fit housing is the main dimension, so measure the housing and plan the link around the joint before fabricating.

Key features

  • Machined Johnny Joint construction
  • 1/2 in. bolt-fit housing
  • Made for fabricators building their own suspension components
  • Universal fit, not tied to a model

Fabricating a bolt-fit housing

A bolt-fit housing relies on the bolts to hold the joint in place, so the fit between the housing and the mounting plate is critical. Measure the housing before you design the mount, and make the bolt pattern match the housing rather than the other way around. Leave room to get a wrench on each fastener once the arm is assembled.

Bolt-fit joints can loosen under the vibration of trail use. Check each fastener before and after drives, and use a locking method that suits the fastener type and your build. Inspect the housing for cracks or elongated bolt holes during service, since wear there often shows up before any play in the joint. Replace parts that show damage rather than trying to repair the housing in place.

Specifications

Brand Currie
Part number CE-9112M2
UPC 70000519805
Style Machined Johnny Joint
Housing 1/2 in. bolt-fit housing
Fitment listed Universal fit

Vehicle fitment

Universal fit is the only fitment listed, so this joint is not matched to a model. Use the 1/2 in. housing fit and your arm design to decide where it suits the build.

No year range, chassis code or model is named for this part. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check bolt engagement into the housing before loading the joint, and retighten after first use.

What’s included

Confirm whether the housing and fasteners come with the joint before planning the build.

SKU: CURCE-9112M2 Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 6.00 × 6.00 × 4.00 in
brands

Questions & Answers

What is the Currie CE-9112M2?

It is a machined Johnny Joint with a 1/2 in. bolt-fit housing, made for fabricators who build their own suspension components. The part number is CE-9112M2 and it is a universal fit.

Does this joint fit a particular Jeep?

No model, chassis code or year range is named, so fit is not confirmed for any vehicle. Currie lists universal fit, and suitability depends on the arm, housing and mounts you fabricate.

Are the housing and bolts included?

The housing spec is 1/2 in. bolt-fit, but included hardware and quantity are not known. Confirm the contents before you plan the build.

How often should bolts in a bolt-fit housing be checked?

Check them before the first trail trip, after the first few runs, and at each service interval. Loose fasteners and any movement at the housing are the usual signs to act on. Retighten to the torque your build calls for and recheck after any heavy impact.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Currie Flex Joints on Amazon