Overview
The Currie CE-9114-14 is a 2 1/2 in. forged Johnny Joint with a 1 1/4 in-12 right-hand threaded shank, made for builders who use Johnny Joints in adjustable control arms or their own fabricated arms. It is a male rod-end style forging that takes the internals of the CE-9112 2 in. Johnny Joints.
The joint is greasable through the outer shell and fits any Currie adjustable upper control arm, as well as universal builds where the builder makes the arm. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Forged male rod-end style body that takes the internals of Currie’s CE-9112 2 in. Johnny Joints
- Externally greased, with grease passing through the outer shell
- Right-hand threaded shank for the joint stud
- Mounting width of 2.365 in.
- Accepts Currie’s greasable thru bolts, which are sold separately
- Currie keeps jam nuts for these units on hand
- Finished in gold zinc plating
Setting up a joint
A Johnny Joint works as a pivot that lets the control arm move while the axle articulates. The stud and shank carry the arm’s load, so the joint must match the arm’s mounting width, stud size and hole diameter before any welding or bolting begins.
Before installing, plan grease access. Because the joint is greased through the outer shell, position the arm so the fitting can be reached without disassembly. Use the thru bolt that matches the hole, and keep the jam nut snug against the stud so the joint does not work loose under load.
Once installed, grease the joint after the first trail runs and periodically after that. Check the stud, bolt and jam nut for loosening, and look for grease that will not purge, since that can signal wear inside the joint.
- Check grease fitting access before final mounting
- Match the bolt to the hole size
- Inspect the stud and jam nut after the first trail runs
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9114-14 |
| UPC | 70000662421 |
| Joint type | Johnny Joint, forged male rod end, externally greased |
| Joint size | 2 1/2 in. |
| Mounting width | 2.365 in. |
| Shank thread | 1 1/4 in-12 right-hand threaded shank |
| Thru bolt hole | 9/16 in. in the specifications |
| Finish | Gold zinc plating |
| Sold as | Each |
The thru bolt hole is 9/16 in. Check the hole size and stud threads against your arm before ordering.
Vehicle fitment
It is intended for Currie adjustable upper control arms and fabricated arms. Check your arm’s load rating and stud size against the joint before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The joint is greasable through the outer shell. The thru bolt is not included, so source a bolt that matches the hole size you confirm. Check that the stud, bolt and jam nut suit your arm’s load before the vehicle is driven.
What’s included
One forged Johnny Joint, sold each, finished in gold zinc plating. The item is sold without bolt.
Not included: the thru bolt. Currie’s greasable thru bolts are sold separately, and Currie keeps jam nuts for these units on hand; neither is part of this item.









