Differential pinion yokes for Dana, Ford, GM and Chrysler axles, including 1310, 1330 and 1350 series, strap and U-bolt styles, and conversion kits. This category is for drivetrain repairs and driveshaft upgrades after a lift or axle swap. Brands include G2 Axle and Gear, Crown Automotive, Dana Spicer and Currie. Open a product page for series and fitment notes, then compare the products below.
Differential Pinion Yoke
Showing 1–12 of 57 resultsSorted by popularity
-
-
Drive Shafts & Drive Shaft Components
TeraFlex Rear Axle Pinion Yoke for High-Angle CV Drive Shaft – 1959310
Drive Shafts & Drive Shaft ComponentsTeraFlex Rear Axle Pinion Yoke for High-Angle CV Drive Shaft – 1959310
- TeraFlex rear axle pinion yoke for a high-angle CV drive shaft conversion
- Needed with the TeraFlex High-Angle Rzeppa CV drive shaft conversion
- For 2007–2018 Jeep Wrangler JK, 2-door and 4-door, with a 3-6 inch lift
- Dust shield included
SKU: TER1959310 -
Drive Shafts & Drive Shaft Components
TeraFlex Front Axle Pinion Yoke for High-Angle CV Drive Shaft – 1959210
Drive Shafts & Drive Shaft ComponentsTeraFlex Front Axle Pinion Yoke for High-Angle CV Drive Shaft – 1959210
- TeraFlex front axle pinion yoke for a high-angle CV drive shaft conversion
- Needed with the TeraFlex High-Angle Rzeppa CV drive shaft conversion
- For 2007–2018 Jeep Wrangler JK, 2-door and 4-door, with a 3-6 inch lift
- Dust shield included
SKU: TER1959210 -
Differential Pinion Yoke
Currie 1310 Nodular Yoke for Ford 9″, Long style – CE-4042L
- Currie CE-4042L 1310 series long yoke for Ford 9 Inch rear axles
- Cast from 65,000 p.s.i. nodular iron, strap style yoke
- Designed for stock configuration pinion supports
- Part number CURCE-4042L; needs the CE-4059 (1330) U-joint U-bolt kit
SKU: CURCE-4042L -
Differential Pinion Yoke
Trail Gear Samurai To Toyota Driveline Adapter Yoke With Dust Cover – 100117-3-KIT
Differential Pinion YokeTrail Gear Samurai To Toyota Driveline Adapter Yoke With Dust Cover – 100117-3-KIT
- Trail Gear driveline adapter yoke that lets a Samurai driveline bolt to Toyota parts
- Fits 1986–1995 Suzuki Samurai driveshaft patterns
- Includes a dust cover
- Part number 100117-3-KIT
SKU: TGI100117-3-KIT -
Differential Pinion Yoke
Omix-ADA Dana 30 Yoke Kit – 16580.27
- Dana 30 yoke kit for the front driveshaft
- Fits Dana 30 Reverse and Dana 30 TJ axle types
- Fits the 1972–1986 Jeep CJ models and the 1981–1985 Scrambler, plus 1997–2006 Wrangler TJ
- Omix-Ada part number 16580.27, UPC 804314217686
SKU: OAI16580.27 -
-
Differential Pinion Yoke
Omix-ADA Dana 30/ 35/ AMC 20 Pinion Yoke – 16580.02
- 26-spline U-bolt style pinion yoke
- Fits 1987–1991 Jeep Cherokee (XJ) and 1987–1995 Jeep Wrangler (YJ)
- Dana 30 front, Dana 35 and AMC 20 axle types
- Replaces OE 935685; Omix-Ada part number 16580.02, UPC 804314017705
SKU: OAI16580.02 -
-
What a pinion yoke does
The pinion yoke bolts to the splined input shaft of the differential and connects the driveshaft's U-joint to the axle. Torque passes from the driveshaft through the yoke into the pinion gear. Its shape and size must match three things: the pinion spline count, the U-joint series and the way the driveshaft attaches.
Matching a yoke
- **Axle model.** Yokes are listed by axle, such as Dana 30, Dana 35, Dana 44, Dana 60/70, Ford 9-inch, GM 8.5-inch 10-bolt, GM 8.875-inch 12-bolt or Chrysler 8.25. Use the one for your housing.
- **Spline count.** The number of pinion splines must match. A Dana 44 yoke does not fit a 30 unless the spline count is the same.
- **U-joint series.** 1310, 1330 and 1350 are common series. The yoke has to match the U-joint cap size and the driveshaft end.
- **Attachment style.** Strap-and-bolt yokes use a strap that holds the U-joint caps, while U-bolt and flange designs use different hardware. Check what is included, because U-bolt kits and hardware are often sold separately.
- **Material and strength.** Forged steel yokes handle higher torque than stock cast pieces, and a conversion kit can step up from a 1310 to a 1350 series for stronger driveshafts.
Upgrade and conversion kits
Some kits convert a smaller yoke, such as on a Dana 30 or 35, to a larger U-joint series. This is popular in lifted or larger-tire builds because it allows a stronger driveshaft. Conversion often means changing the driveshaft end too, so check that all parts match.
Installation notes
Pinion yoke replacement affects the pinion bearing preload, so the process matters. Mark the nut and yoke position or count the turns before removal, and use a new crush sleeve or nut if the service manual requires it. A pinion seal is usually replaced at the same time. Torque the pinion nut to specification, check bearing preload with an inch-pound torque wrench, and recheck the driveshaft angles after the change.
Driveline parts are safety related. A failed yoke or loose pinion nut can lead to vibration, loss of power or a locked axle. If you are unsure, have a professional install it. Confirm fitment for your exact year, make, model and axle, and compare to the manufacturer's specifications.
Confirm the parts before disassembly. Count the pinion splines on the old yoke, measure the U-joint cap diameter and the distance between the cap seats, and check the way the driveshaft bolts on. Compare the pinion seal diameter as well, since the yoke seal surface must be smooth and unworn.
Often paired parts are a new pinion seal, a pinion nut or crush sleeve, a U-joint kit, and the U-bolt or strap hardware. Common mistakes include reusing a grooved yoke that will cut a new seal, forgetting to mark the original nut position, tightening the nut past specification and crushing the sleeve, and mixing series sizes. After installation, check the gear oil level and look for leaks. Inspect the yoke periodically for play, which you can check by trying to move it up and down and in and out with the driveshaft removed.
Popular Differential Pinion Yoke brands
- G2 Axle and Gear (18)
- Crown Automotive (14)
- Dana Spicer (10)
- Currie (4)
- Advance Adapters (3)
- Omix-Ada (3)
- Alloy USA (2)
- TeraFlex (2)
- Trail Gear (1)
Differential Pinion Yoke FAQ
How do I know which pinion yoke I need?
Identify your axle model and pinion spline count, then match the U-joint series and attachment style. Axle tags, casting numbers and the old yoke help. Confirm fitment for your exact year, make and model before ordering.
What is the difference between 1310 and 1350 series?
They describe U-joint sizes. The 1350 series is larger and generally stronger than the 1310. The yoke, U-joint and driveshaft end must all be the same series, so upgrading usually means changing more than the yoke.
Do I need to reset pinion preload when replacing a yoke?
Yes, care is needed. The pinion nut sets bearing preload, and the crush sleeve may need replacing. Follow the service manual, torque the nut to specification and check preload. A professional can do this if you lack tools.
Are U-bolts or straps included with the yoke?
Not always. Some product descriptions say hardware is not included, and U-bolt kits can be listed separately. Read each listing carefully and confirm the correct hardware for the yoke style you buy.








