Overview
The Currie 60-8013 is a front inner axle seal for RockJock 44, 60 and 70 front ends that use standard tubes and 35 spline inner axles. It is the inner seal Currie uses in those RockJock front ends.
The machined area presses into the housing at 2.625 in outside diameter, and the body of the seal measures 2.035 in outside diameter. Fitment is described by axle and front end type, not by vehicle year, make or model.
Key features
- Inner seal for RockJock 44, 60 and 70 front ends
- Built for standard tubes with 35 spline inner axles
- Machined press-fit area at 2.625 in outside diameter
- Seal body measures 2.035 in outside diameter
Front inner seal basics
The inner axle seal keeps differential lubricant inside the front housing and keeps it away from the brake components. Inner seals work under constant pressure from the differential and see heat from the axle, so a worn or cracked lip can leak gear oil onto the brake rotor or pads. A leaking seal is often found after the lubricant level has dropped, which is why checking the seal during regular front axle service is useful.
Before pressing a new seal in, clean the bore and look for nicks, rust or burrs that could cut the seal lip. Lightly smooth any damage and wipe the bore clean. Use a seal driver that pushes evenly on the seal face rather than the lip, and check that the seal sits square in the housing before reinstalling the axle shaft.
- Clean the housing bore before pressing the seal in
- Look for nicks, burrs or rust on the bore
- Drive the seal in evenly with a proper driver
- Check that the seal sits square before reassembly
Specifications
| Brand | Currie |
|---|---|
| Part number | 60-8013 |
| UPC | 700007983701 |
| Seal position | Inner |
| Press-fit outside diameter | 2.625 in |
| Body outside diameter | 2.035 in |
| Compatible inner axles | 35 spline |
Vehicle fitment
The seal is for RockJock 44, 60 and 70 front ends with standard tubes and 35 spline inner axles. The seal dimensions suit those housings only. Confirm your front end type before ordering.
Confirm that your front end is a RockJock 44, 60 or 70 with standard tubes and 35 spline inner axles before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the inside diameter of the axle tube before fitting. If the tube is smaller than 2.035 in, a different expandable seal setup is needed, so check that dimension first.
What’s included
One front inner axle seal.
Not included: Plan for any other seals or hardware your installation needs separately.









