Alloy USA has 113 parts in the Slickrock 4X4 catalog, most of them in Replacement Axle Shafts (28), Ring and Pinions (17), Dana 44 Axle Shafts (10) and Dana 44 Ring and Pinion (9). The vehicles Alloy USA parts here fit most often are the Jeep Wrangler (JK), Jeep Wrangler (TJ) and Jeep Wrangler (YJ). Alloy USA part numbers look like "99STUD3" and "11500"; each product title ends with its part number, and searching for one opens the product. Pick your vehicle at the top of the page to narrow the list to what fits.
Alloy USA
Showing 1–48 of 113 resultsSorted by popularity
-
-
-
-
-
Performance Axle Components
Alloy USA Front Dana 44 Reverse Cut 210MM 4.88 Ring and Pinion – D44488RJLX
Performance Axle ComponentsAlloy USA Front Dana 44 Reverse Cut 210MM 4.88 Ring and Pinion – D44488RJLX
- Front Dana 44 reverse-cut ring and pinion set
- 4.88 gear ratio with a 210 mm ring gear
- 8620 alloy steel forgings, Gleason cut
- Alloy USA 5-year limited warranty
- Part number D44488RJLX
SKU: ALYD44488RJLX -
Axle Upgrade Kits
Alloy USA Ford 8.8 Rear Axle Shaft – 15103
- Replacement Ford 8.8 passenger side rear axle shaft
- 31 splines; bearings, seals and studs not included
- Fits 1987–1996 Ford Bronco and F-150, and related Ford models
- Made from 1541H or 4140 steel, heat-treated and induction hardened
SKU: ALY15103 -
-
-
-
Axle Upgrade Kits
Alloy USA Dana 30 Chromoly Front Axle Kit – 12129
- Dana 30 standard front axle kit with 4340 chromoly shafts
- Heat-treated twice and designed to be up to 40% stronger
- Fits 1972–1983 Jeep CJ5, 1976–1983 CJ7 and 1981 Scrambler
- Axle kit with 30 splines and no differential included
SKU: ALY12129 -
Wheel Spacers and Adapters
Alloy USA 5x4.5 to 5x5 Inch Bolt Pattern with 1.25 Inch Offset Wheel Adapters (Red) – 11311
Wheel Spacers and AdaptersAlloy USA 5x4.5 to 5x5 Inch Bolt Pattern with 1.25 Inch Offset Wheel Adapters (Red) – 11311
- Alloy USA ALY11311 red aluminum wheel adapter, 1.25 inch thick
- Converts 5 on 5 wheels to 5 on 4.5 hubs
- Hub centric, with grade-8 hardware
- Vehicle years not listed; confirm bolt pattern before ordering
SKU: ALY11311 -
Lift Kits
Alloy USA 4″ Lift Kit with Superide Shocks – 61403
- Lift kit for 2007–2018 Jeep Wrangler JK two-door models
- Lift height range of 4 to 5.5 inches; the kit is stated to clear 35-inch tires
- Four coil springs and four Superide hydraulic shocks with 10-stage velocity-sensitive valving
- Adjustable front track bar, extended sway bar end links and brake hose extension brackets
SKU: ALY61403 -
Lift Kits
Alloy USA 4″ Lift Kit with Superide Shocks – 61301
- 4-inch lift kit for 1997–2002 Jeep Wrangler TJ SE, Sahara, Sport and X
- 4-inch front coils, 2.5-inch rear coils, tubular lower control arms
- Four Superide hydraulic shocks with 10-stage velocity valving
- Part number 61301, rated for 33-inch tires, 5-year limited warranty
SKU: ALY61301 -
Lift Kits
Alloy USA 2.5″ Lift Kit – 61501
- Complete 2.5-inch lift kit for 2019, 2021 and 2022 Jeep Wrangler JL Unlimited 4-door
- Location-specific coil springs and extended sway bar end links
- Shock extension brackets, compression-stop spacers, all hardware
- Part number 61501, 5-year limited warranty
SKU: ALY61501 -
-
-
-
-
-
-
-
-
-
Wheel Stud
Alloy USA Wheel Lug Stud – 99STUD5
- Alloy USA 99STUD5 axle wheel stud for restoring an axle or replacing a broken or stripped stud
- Made from high quality steel and precision machined
- Part number 99STUD5, UPC 804314215408
- No vehicle is named, so confirm fit for your vehicle before ordering.
SKU: ALY99STUD5 -
-
-
-
Differential Switches And Shifters
Alloy USA GM Differential Cable Lock Kit By Alloy USA – 450800
- Cable lock kit for GM 2500 and 3500 trucks with 8-lug axles (part number 450800)
- Positive actuation that works in freezing weather
- Allows 2WD low range with control from inside the vehicle
- Fits 1988 to 1999 Chevrolet and GMC 2500 trucks and 1992 to 1998 Suburbans
SKU: ALY450800 -
Axle Upgrade Kits
Alloy USA Ford Differential Cable Lock Kit By Alloy USA – 450750
- Ford differential cable lock kit with positive manual engagement
- Not vacuum dependent; for vehicles with a front locker
- Fits 1997–2003 Ford F-150 and 2004 F-150 Heritage
- Allows 2WD low range control from inside the vehicle
SKU: ALY450750 -
Differential Switches And Shifters
Alloy USA GM Differential Cable Lock Kit By Alloy USA – 450500
- Cable lock kit for GM S-Series trucks with a vacuum actuator (part number 450500)
- Positive manual engagement and disengagement
- Not vacuum dependent
- Allows 2WD low range with control from inside the vehicle
- Fits Chevrolet S10 and GMC Jimmy, S15 Jimmy and Sonoma
SKU: ALY450500 -
Differential Switches And Shifters
Alloy USA Dodge Differential Cable Lock Kit By Alloy USA – 450450
Differential Switches And ShiftersAlloy USA Dodge Differential Cable Lock Kit By Alloy USA – 450450
- Cable lock kit for Dodge Ramcharger front lockers (part number 450450)
- Positive manual engagement and disengagement
- Not vacuum dependent
- Allows 2WD low range with control from inside the vehicle
- Fits 1985–1993 Dodge Ramcharger
SKU: ALY450450 -
Differential Switches And Shifters
Alloy USA Dodge Differential Cable Lock Kit By Alloy USA – 450400
Differential Switches And ShiftersAlloy USA Dodge Differential Cable Lock Kit By Alloy USA – 450400
- Positive-actuation differential cable lock kit for Dodge trucks
- Not vacuum dependent
- Fits Dodge Ram 1500 (1994–2001 and 2003–2004) and Ram 2500 (1994–2002)
- Alloy USA part number 450400, UPC 804314226374
SKU: ALY450400 -
-
Differential Pinion Yoke
Alloy USA Dana 35 Yoke 1310 Conversion Kit – 380002
- Alloy USA 380002 Dana 35 1310 yoke conversion kit
- Includes new yoke, pinion nut, pinion spacer, pinion seal, U-joint and U-bolts
- Fits Dana 35 axles; confirm your vehicle’s year, model and trim before ordering.
SKU: ALY380002 -
-
Dana 44 Ring and Pinion
Alloy USA JK Dana 30 Front & Rear 4.56 Ring and Pinion Kit – 360009
- Alloy USA 360009 front and rear ring and pinion kit, 4.56 ratio
- Dana 30 JK and Dana 44 JK axle types listed
- Inferred fit for the Wrangler JK, 2007-2018, from the JK Dana 30 title
- Complete kit for upgrading front and rear axles
SKU: ALY360009 -
Dana 44 Ring and Pinion
Alloy USA JK Rubicon D44 4.10 Front And Rear Ring and Pinion Kit With Install Kits – 360005
Dana 44 Ring and PinionAlloy USA JK Rubicon D44 4.10 Front And Rear Ring and Pinion Kit With Install Kits – 360005
- Alloy USA 360005 front and rear D44 ring and pinion kit with install kits
- 4.10 gear ratio on Dana 44 JK axle type
- Inferred fit for the Wrangler JK, 2007-2018, from the JK Rubicon title
- Matched gears and install kits included
SKU: ALY360005 -
Dana 44 Ring and Pinion
Alloy USA JK Dana 30 & D44 4.10 Ring and Pinion Kit With Install Kits – 360002
Dana 44 Ring and PinionAlloy USA JK Dana 30 & D44 4.10 Ring and Pinion Kit With Install Kits – 360002
- Alloy USA 360002 front and rear ring and pinion kit for Wrangler JK, 2007-2018
- 4.10 gear ratio with matched gears
- Install kits included for both axles
- Axle types: Dana 30 JK, Dana 44 JK and Dana 30A KJ
SKU: ALY360002 -
Ring and Pinion Installation Kits
Alloy USA Dana 44 JK Non Rubicon Rear Master Ring and Pinion Installation Kit – 352053
Ring and Pinion Installation KitsAlloy USA Dana 44 JK Non Rubicon Rear Master Ring and Pinion Installation Kit – 352053
- Alloy USA 352053 Dana 44 JK non-Rubicon rear master ring and pinion kit
- Built for 2007-2018 Jeep Wrangler JK non-Rubicon rear axles
- Bearings and seals included
- Part number 352053, UPC 801773044860
SKU: ALY352053































