Select your vehicle

Alloy USA 4″ Lift Kit with Superide Shocks – 61403

Alloy USA

Shop Jeep Wrangler JK Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Lift kit for 2007–2018 Jeep Wrangler JK two-door models
  • Lift height range of 4 to 5.5 inches; the kit is stated to clear 35-inch tires
  • Four coil springs and four Superide hydraulic shocks with 10-stage velocity-sensitive valving
  • Adjustable front track bar, extended sway bar end links and brake hose extension brackets

Description

Overview

The Alloy USA ALY61403 is a 4-inch lift kit with Superide hydraulic shocks for the 2007–2018 Jeep Wrangler JK. The kit supplies four replacement coil springs and four Superide hydraulic shocks, along with extended sway bar end links and brake hose extension brackets. The lift height range is 4 to 5.5 inches, and the kit clears 35-inch tires.

Ride quality comes from the Superide shocks, which use 10-stage velocity-sensitive valving to control the springs over rough ground while keeping the highway ride comfortable. The front track bar is fully adjustable and is included to help correct suspension geometry issues that lifted Wranglers commonly develop. Part number ALY61403 is the kit’s only listed part number.

Key features

  • Four replacement coil springs for the 4 to 5.5 inch lift range
  • Four Superide hydraulic shocks with 10-stage velocity-sensitive valving
  • Fully adjustable front track bar for correcting geometry on a lifted vehicle
  • Extended length sway bar end links
  • Brake hose extension brackets that let the factory brake hoses reach the new height
  • Covered by a 5-year limited warranty from Alloy USA

Choosing a lift height

Lift height is the main choice to make with a suspension kit of this type. Taller springs and shocks change how the Wrangler sits at each corner, so think about how the truck will be used before settling on the upper end of a range. Heavier tires, a winch or a roof rack add weight that the springs carry, and a vehicle that sees mostly highway miles may suit a lower setting. Once the kit is in, measure the front and rear heights so you know exactly where the truck sits compared with its starting point.

Some related parts are often replaced alongside a lift. Upper control arms, driveshaft slip yokes and brake lines may need attention at higher heights, so inspect them while the truck is apart. Look for leaking shock bodies, sagging springs or uneven tire wear during the first few weeks of driving.

Specifications

Brand Alloy USA
Part number ALY61403
Lift height range 4 to 5.5 inches
Tire clearance 35-inch tires
Front shocks Superide hydraulic
Rear shocks Superide hydraulic
Rear lift component Coil spring
Front track bar Fully adjustable
Warranty 5-year limited
Fitment type Direct fit

Vehicle fitment

The kit fits 2007–2018 Jeep Wrangler JK two-door models, including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions.

It fits two-door Wrangler JK models. Confirm fit for your vehicle’s year, model and trim before ordering for a four-door Wrangler Unlimited or a Wrangler JL.

Installation notes

A lift of this size changes spring rate, ride height and suspension geometry, so plan a wheel alignment and a driveline angle check after the kit is installed. Set the adjustable front track bar once the vehicle is at its final height. Recheck brake hose length and sway bar link clearance after the first few drives.

What’s included

The kit includes four replacement coil springs, four Superide hydraulic shocks, a fully adjustable front track bar, extended length sway bar end links and brake hose extension brackets.

SKU: ALY61403 Categories: ,

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201870th Anniversary (2-Door), 75th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), X (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Alloy USA ALY61403 fit a four-door Jeep Wrangler Unlimited?

The kit fits two-door Wrangler JK models from 2007 through 2018. Four-door Unlimited models are not part of that fit, so confirm fit for your vehicle's year, model and trim before ordering.

How much lift does the ALY61403 provide?

The lift height range is 4 to 5.5 inches, and the kit clears 35-inch tires on two-door Wrangler JK models. Measure your vehicle's height before and after installation to confirm the change.

Does the kit include shocks?

Yes. Four Superide hydraulic shocks with 10-stage velocity-sensitive valving are included, and the front and rear shock fields both name the Superide hydraulic design. The shocks are part of the kit rather than an optional add-on.

Does this kit include a track bar?

Yes. The front track bar is fully adjustable and helps correct suspension geometry on a lifted vehicle, so the Wrangler handles more predictably on the road.

How do I tell when lift kit shocks need replacing?

Look for oil leaking down the shock body, a bouncy or floating ride, or uneven tire wear. Inspect the shocks and their mounting bolts during routine service, and replace them as a pair if one fails.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Lift Kits on Amazon