Overview
The Alloy USA 360009 is a 4.56 ratio front and rear ring and pinion kit for JK Dana 30 and Dana 44 axles. It gathers the parts needed to upgrade both the front and rear axles, so the regear can be planned as one job.
The kit is a complete option for re-gearing front and rear differentials. It covers the Dana 30 JK and Dana 44 JK axle types, with the Dana 30 named for the front and rear.
Key features
- Complete ring and pinion kit
- Front and rear axle upgrade
- 4.56 gear ratio
- Dana 30 JK and Dana 44 JK axle types
- Contains everything needed for the front and rear upgrade
Setting up both axles
A 4.56 ratio on both the front and rear changes how the vehicle responds at low speed and on the highway. A numerically higher ratio keeps the engine turning faster at a given road speed, so the trade-off is more pulling force against busier cruising. Tire size and transmission gearing both affect how the change feels, so consider them before choosing.
A complete two-axle kit means both carriers come apart and both gear sets need pinion depth and backlash checks. Bearing preload should be set on each carrier as well. Once the work is done, keep the first drives gentle so the gears can settle, and recheck for noise or heat afterward.
- Set pinion depth on both axles
- Check backlash on each gear set
- Set bearing preload on each carrier
- Recheck for noise after early drives
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 360009 |
| UPC | 804314269180 |
| Axle location | Front and rear |
| Axle types | Dana 30 JK, Dana 44 JK |
| Gear ratio | 4.56 |
| Popular axle manufacturer | Dana |
| Kit | Complete ring and pinion kit, contents not itemized |
Vehicle fitment
The JK Dana 30 front and rear kit covers the 2007-2018 Jeep Wrangler (JK). The Dana 30 JK and Dana 44 JK axle types apply.
Only the JK Wrangler range is covered by this inference. Other Dana 30 applications, Jeep generations outside 2007-2018, and non-Jeep axles are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A complete front and rear kit calls for setup on both axles at once, with pinion depth and backlash checked against each gear set. Professional setup and a break-in period are the usual approach for new gears.
What’s included
The kit is complete, with the gears and install parts needed to upgrade the front and rear axles. Check the individual contents against your installation before starting.




