Overview
The Alloy USA Dana 30 Reverse 3.73 Ratio Ring and Pinion, part number D30373R, is a 3.73 ratio gear set for the front axle, built to the Dana 30 Reverse type.
The gears are forged from 8640 steel and machined on Gleason equipment. Confirm the axle and vehicle year, model and trim before fitting, particularly for XJ and YJ applications.
Key features
- 3.73 gear ratio
- Dana 30 Reverse axle type
- Forged 8640 steel construction
- Gleason-machined for consistent setup
Reverse-type axle notes
Reverse-type gear sets are cut so the ring and pinion rotate in the opposite direction from standard sets, so the rotation side of the housing and axle must match. Mixing a reverse set with a standard carrier leads to noise and fast wear. A 3.73 ratio is a moderate choice that keeps highway speeds comfortable and gives reasonable pull for light trail use, though heavier tires will need more gearing. Check the axle ratio and gear rotation before ordering, and measure the carrier if the housing has been modified.
Ring and pinion installation is a precision job. Pinion depth, carrier preload and backlash all shape the tooth contact pattern, and an off pattern will whine and wear early. Inspect the carrier bearings, pinion seal and any shims while the axle is open. Run the new gears in gently after installation and listen for changes in tone during the first drives. Keep the gear oil at the correct level from the start.
- Confirm rotation before ordering
- Inspect carrier bearings and pinion seal
- Check tooth pattern before final assembly
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | D30373R |
| UPC | 804314189174 |
| Gear ratio | 3.73 |
| Axle type | Dana 30 Reverse |
| Axle location | Front |
| Popular axle manufacturer | Dana |
| Material | 8640 steel |
Vehicle fitment
No vehicle years are listed, so fitment isn’t confirmed. The title’s XJ and YJ wording comes without a year range, so verify the axle and application with Alloy USA before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Reverse-type Dana 30 gears need pattern and backlash checks by a skilled technician, followed by a gentle break-in drive.
What’s included
One Dana 30 Reverse ring and pinion set is included. Not included: no bearings, shims or axle carriers are named.






