Overview
The Alloy USA Dana 30 JK Front 4.56 Ratio Ring and Pinion, part number D30456RJK, is a 4.56 ratio gear set for front Dana 30 axles. The specifications list Dana 30 JK and Dana 30 Reverse as axle types.
Alloy USA credits forging from 8640 steel and precision Gleason machining with ease of setup. The package is intended for modified vehicles and for tire sizes that call for a higher ratio to restore lost power.
Key features
- 4.56 gear ratio
- Dana 30 JK and Dana 30 Reverse axle types listed
- Forged from 8640 steel
- Gears machined to precision for setup
Dana 30 front gear care
Front differential gears take a steady load on climbs and sudden loads when the tires grip hard, so a 4.56 ratio is often chosen for crawling and larger tires. A numerically higher ratio lowers top speed for a given rpm and increases engine speed at highway pace. Owners who drive mostly on pavement can notice more drone and more heat. Consider the tire diameter, transmission gearing and driving habits before settling on the ratio.
Good results depend on setup. Pinion depth, backlash and carrier preload should be correct before the axle goes back together, and the tooth contact should look even on the drive side and coast side. Inspect the carrier bearings and pinion seal while the housing is open, because bearings with play can quickly ruin new gears. Use a break-in period, watch for whine or heat, and check fluid level after the first trips.
- Verify pinion depth and backlash
- Check bearings for play before reassembly
- Note any whine after the break-in
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | D30456RJK |
| UPC | 804314239107 |
| Gear ratio | 4.56 |
| Axle type | Dana 30 JK; Dana 30 Reverse |
| Axle location | Front |
| Popular axle manufacturer | Dana |
| Material | 8640 steel |
Vehicle fitment
The set has no year range or vehicle model tied to it. Match your axle housing and pinion details to this set before installing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 4.56 Dana 30 gear set calls for careful pinion depth and backlash setup by an experienced technician, followed by a gentle break-in drive.
What’s included
One front ring and pinion set is the stated content. Not included: Bearings, seals and carrier parts must be bought separately.





