Overview
The Alloy USA Dana 30 Standard 3.73 ratio ring and pinion, part number ALYD30373, is a replacement gear set for Dana 30 Standard axles. The 3.73 ratio suits modified vehicles running oversize tires, which need a higher ratio to offset lost power.
Each gear is forged from 8640 steel and machined on Gleason machines. The machining is intended to make setup easier, and the gears come in common sizes.
Key features
- 3.73 gear ratio for oversize-tire gearing
- Forged from high-quality 8640 steel
- Machined on precision Gleason machines
- Fits the Dana 30 Standard axle type, in rear or front location.
Gear ratio and tire size
Gear ratio sets how many times the driveshaft turns for each turn of the wheel. Taller tires turn fewer times per mile, which is why a higher ratio is often chosen to make up for lost acceleration. The change is most noticeable off the line and on steep grades, and the effect on fuel use and road noise should be considered.
Pick a ratio together with tire diameter and how the vehicle will be used, rather than from a single number. Ring and pinion work is usually done with new pinion and carrier bearings, a new pinion nut, and fresh crush sleeves or shims as the setup requires. Keep records of the backlash and tooth contact so later adjustments are easier to track.
- Confirm tire diameter before choosing a ratio
- Replace the pinion nut during the install
- Check the axle housing for leaks and damage
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | ALYD30373 |
| Axle manufacturer | Dana |
| Axle type | Dana 30 Standard |
| Axle location | Rear or front |
| Gear ratio | 3.73 |
| Material | 8640 steel, forged |
| Fitment type | Universal fit |
Vehicle fitment
Fit depends on your vehicle’s year, model and trim, so verify your axle is a Dana 30 Standard before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Setting backlash and tooth contact on a ring and pinion is precision work, even with the brand’s machining, so a professional setup and a break-in period are the practical choice.
What’s included
Plan to check bearings, shims and hardware separately before installation.









