Overview
The Alloy USA 61501 is a complete suspension lift kit for the Jeep Wrangler JL Unlimited 4-door. It is a 2.5-inch lift kit, with a lift height range of 0 to 3.5 inches. It is designed for the JL and works as a full suspension system rather than a single component.
The coil springs are location-specific, with spring rates set to hold a level stance while adding clearance for larger tires. The kit includes shock absorber extension brackets, which let you reuse the factory shocks. Extended-length sway bar end links and compression-stop spacers help control suspension travel, and all installation hardware is included. The kit carries a 5-year limited warranty.
The kit is designed specifically for the Wrangler JL, and the shock extension brackets let you keep the factory shocks in use.
Key features
- Location-specific coil springs
- Shock extension brackets
- Extended-length sway bar end links
- Compression-stop spacers
- All installation hardware included
- 5-year limited warranty
Suspension lift geometry basics
A suspension lift raises the chassis by changing springs, control arms and shocks, rather than by spacing the body. The change in ride height shifts suspension angles, which is why a complete kit with matched springs, end links and shock brackets is designed to work as a set. Mixing parts from different kits can leave the suspension unbalanced and affect steering feel.
After installation, get the alignment checked, because caster and toe settings can move with the new geometry. Driveshaft angles should be checked too, especially on a JL with a higher stance. Inspect the sway bar end links and bushings at regular service, since extended links work at a different angle than stock ones. Sway bar disconnects and steering stabilizer condition are worth reviewing when the lift changes the stance.
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 61501 |
| Lift height range | 0 to 3.5 inches |
| Rear lift component | Coil spring |
| Shocks | Superide hydraulic, front and rear, per the specifications |
| Warranty | 5-year limited |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2019 and 2021–2026 Jeep Wrangler JL Unlimited Rubicon, Sahara, Sport and Sport S 4-door models.
Only the 2019 and 2021–2026 model years are covered, so 2018 models fall outside this kit. Two-door and Moab models are not covered either. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shock extension brackets let you reuse the factory shocks. Confirm whether Superide hydraulic shocks are included before ordering.





