Overview
It is a cable-operated lock kit for front lockers on the 1985 to 1993 Dodge Ramcharger. It is made for the Dana 44 axle and works through positive manual engagement and disengagement.
Engagement and disengagement are both done by hand through the cable, with no vacuum needed. Disengaging the front locker tightens the turning radius off-road, and 2WD low range can be selected from inside the vehicle.
Key features
- Positive manual actuation by cable
- Not vacuum dependent
- Allows disengagement on vehicles with a front locker, for tight turns off-road
- Adds 2WD low range with control from inside the vehicle
Dana 44 front axle notes
The Dana 44 is a heavy-duty front axle, and a locker on it is often used for steep, slippery terrain. A cable-operated lock works best when its routing stays clear of heat sources, moving suspension parts and steering linkage. Route the cable with gentle bends so it moves freely through the full suspension travel.
Fitting a lock to an older Ramcharger means inspecting the axle carrier, the hubs and the cable bracket. Dirt and corrosion commonly seize these parts over the years, so clean and lubricate them before assembly. Keep spare cable clips on hand for trail repairs.
- Route the cable away from exhaust heat
- Check the lock mechanism for free movement
- Lubricate pivot points and cable ends
- Recheck clearance after suspension changes
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 450450 |
| UPC | 804314226381 |
| Axle type | Dana 44 |
| Actuation | Cable, positive manual engagement |
Vehicle fitment
It fits the 1985 to 1993 Dodge Ramcharger in Base, Canyon Sport and Royal SE trims. It is for vehicles with a Dana 44 front locker.
The list names Ramcharger models only. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is the cable lock. Plan cable routing and mounting hardware before starting, since they are not part of the kit.









