Overview
The Alloy USA 99STUD5 is an axle wheel stud for restoring an axle or replacing a broken or stripped stud. It is made from high quality steel and precision machined.
It is sold as universal fit, but no vehicle, year, axle or trim is named, so compare the stud’s dimensions with your hub before buying.
Key features
- Made from high quality steel
- Precision machined
- Suited to restoring an axle that has lost a stud
- Replaces a broken or stripped stud
Before you install a stud
Wheel studs carry clamp load from the lug nut through the hub and into the wheel, so a stud that is slightly off in length, thread or seat can loosen or strip under use. When replacing one, pull the old stud and check the bore in the hub for galling or damaged threads, since a stud pressed into a worn hole may not seat properly. Clean the mating surfaces before pressing the new stud in.
Stud replacement often goes with a check of the lug nuts and the brake or hub components nearby. If the old stud was broken by overtightening, look for a bent flange or a cracked hub face. Torque the nuts in a star pattern once the stud is seated, and recheck them after the first few drives.
- Inspect the hub bore for damaged threads
- Match length and thread before pressing in
- Clean the flange seat before fitting
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 99STUD5 |
| UPC | 804314215408 |
| Part type | Axle wheel stud |
| Material | High quality steel |
| Machining | Precision machined |
Vehicle fitment
No vehicle, year, axle model or trim is named for this stud. Compare the stud diameter and hub type with the wheel you are servicing before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
This entry covers one axle wheel stud, 99STUD5. Check the package contents against your installation before starting.









