Overview
The Alloy USA Dana 44 JK rear ring and pinion, part number D44410JK, is a 4.10 ratio gear set for the rear Dana 44 axle used with the Jeep Wrangler (JK). It is for 2007 to 2018 Jeep Wrangler (JK) vehicles with that axle.
Alloy USA says oversize tires call for a higher ratio ring and pinion to restore power lost to the larger tires, and this 4.10 set is one of the ratios in its line.
Key features
- 4.10 gear ratio
- Forged from 8640 steel
- Machined on precision Gleason machines for accuracy and easy set-up
- Rear Dana 44 JK application
Rear axle upgrade planning
On a Wrangler JK, the rear axle carries much of the work when the vehicle is lifted or fitted with larger tires. A ring and pinion change is often one part of a wider drivetrain plan, so the rest of the axle should be inspected before the new gears go in. Check the axle bearings, seals and differential for wear, since a new gear set depends on them.
Gear changes alter how the driveline turns at speed, so the speedometer reading and road gearing shift after installation. Many owners also check driveshaft angles and transfer case setup when the tire size or ratio changes, because those parts work together with the axle.
- Inspect axle bearings and seals before installation
- Recheck the speedometer after the tire or gear change
- Confirm driveshaft angle after a lift
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | D44410JK |
| UPC | 804314189372 |
| Gear ratio | 4.10 |
| Axle type | Dana 44 JK |
| Axle location | Rear |
| Material | 8640 steel, forged |
Vehicle fitment
The gear set is for the rear Dana 44 used on 2007 to 2018 Jeep Wrangler (JK) vehicles. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A ring and pinion set has to be set up with the correct pinion depth and backlash, so professional setup is advised. Plan on a break-in period as the gears settle, and check the contact pattern after setup.
What’s included
One ring and pinion set. Check the package contents against your installation before starting.












