Select your vehicle

Alloy USA AMC Model 20 4.88 Ratio Ring and Pinion – AMC488

Alloy USA

Shop Alloy USA Ring And Pinions on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Alloy USA AMC 20 ring and pinion, 4.88 ratio
  • Part number AMC488, UPC 801773000064
  • Forged 8640 steel gears, Gleason machined
  • Fitment not listed

Description

Overview

The Alloy USA AMC Model 20 4.88 Ratio Ring and Pinion, part number AMC488, is a 4.88 ratio gear set for AMC 20 axles at the front and rear locations.

Higher ratios like this one are used to restore the power that larger tires take away. The gears are forged from 8640 steel and cut on Gleason machines, which helps with setup accuracy.

Key features

  • 4.88 gear ratio for AMC 20 axles
  • Forged from 8640 steel
  • Gleason-machined gear teeth for setup accuracy
  • Suited to both front and rear axle positions.

Setting up AMC 20 gears

The AMC 20 carrier is compact, and its gear sets respond strongly to small changes in pinion depth and backlash. A 4.88 ratio pulls harder at low speed, so it suits larger tires and slow trail work. It also raises engine speed at highway pace, which many drivers notice on long runs. Before choosing, consider the tire size, the transmission gearing, and whether the axle is in good condition, since fresh gears will not last on worn bearings.

Setup is where most problems start. Pinion depth, carrier preload and backlash need to be set together, and the tooth pattern should be checked before the axle goes back into service. Inspect the carrier bearings, pinion seal and axle shafts while the housing is open, since replacing them later is harder. Break the new set in gently, and watch for whine, heat or leaks during the first trips. Keep the gear oil level correct from the start.

  • Check the tooth pattern before final assembly
  • Inspect carrier bearings and axle shafts
  • Listen for whine during the first trips

Specifications

Brand Alloy USA
Part number AMC488
UPC 801773000064
Gear ratio 4.88
Axle type AMC 20
Axle location Front and rear
Popular axle manufacturer AMC
Material 8640 steel

Vehicle fitment

This set is for AMC 20 gears and is a universal fit package. Confirm your AMC 20 axle housing and pinion setup before selecting it.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Setting mesh and backlash on the carrier is a job for a qualified axle technician, and a break-in procedure should follow installation.

What’s included

One AMC 20 ring and pinion gear set. Not included: Bearings and installation hardware come separately, so plan for them before installing.

SKU: ALYAMC488 Category:

Specification

Shipping weight 20.00 lbs
Package dimensions 16.00 × 12.00 × 6.00 in
brands

Questions & Answers

What is part AMC488?

AMC488 is the Alloy USA AMC Model 20 4.88 Ratio Ring and Pinion, UPC 801773000064. It is a 4.88 ratio set for AMC 20 axles at the front and rear locations.

Does this ring and pinion fit my vehicle?

Fit should be checked before buying. The set is for AMC 20 axles and is a universal fit package, so confirm your axle housing and pinion setup before selecting this gear set.

Are the gears forged or machined?

Yes. The gears are forged from 8640 steel and cut on Gleason machines for accuracy and easier setup. Bearings and installation hardware are not included, so plan for them separately.

Should I replace the carrier bearings when installing new gears?

Often yes, especially if the old carrier bearings are rough, loose or show uneven wear. Fresh gears seated on worn bearings can shift out of pattern and wear quickly. Check bearing condition while the carrier is open, since replacing them then is far easier than repeating the job.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Alloy USA Ring And Pinions on Amazon