Overview
The Alloy USA Dana 50/60/70 Iron Cover (part 11207) is a 3/8 inch thick cast steel differential cover for front or rear Dana 50, 60, 61 and 70 axles, painted black inside and out.
The cover is made from 3/8 inch thick cast steel, despite the iron name. It is built to protect the differential and its working parts for as long as the vehicle is owned.
Key features
- 3/8 inch thick cast steel body
- Painted black inside and out
- Made for Dana 50, 60, 61 and 70 axles, front or rear
- Powder coated finish
- Standard oil capacity
Gasket and fluid checks
A differential cover keeps gear oil in and dirt out, so its condition matters more than it seems. Inspect the gasket surface when the cover is removed, and replace the gasket if it is torn or flattened. Clean the mating surface completely before reinstalling so the seal sits flat.
Because the cover is steel with a painted finish, the coating can chip when the truck runs over rocks or when the cover is struck. Touch up bare spots promptly to slow rust. Check the drain and fill plugs when changing fluid, and expect to refill with gear oil after the cover is secured, since gear oil is not included.
- Replace the cover gasket when removing the cover
- Touch up chipped paint promptly
- Check the fill and drain plugs
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 11207 |
| Material | Cast steel, 3/8 inch thick |
| Finish | Painted black inside and out; powder coated |
| Axle location | Front or rear |
| Axle types | Dana 50, Dana 60, Dana 61, Dana 70 |
| Oil capacity | Standard |
Vehicle fitment
It fits Dana 50, 60, 61 and 70 axles at the front or rear. Confirm the axle type on your vehicle matches before ordering.
What’s included
A black steel differential cover.
Not included: Gear oil.









