Overview
The Alloy USA Dana 30 JK Front 4.10 Ratio Ring and Pinion, part number D30410RJK, is a 4.10 gear ratio set for front Dana 30 axles. Dana 30 JK and Dana 30 Reverse are the axle types it is built for.
Oversize tires call for a higher ratio to restore lost power, and Alloy USA cites precision Gleason work for setup ease. The gears are forged from 8640 steel and are offered in popular sizes for modified vehicles.
Key features
- 4.10 ratio for Dana 30 front axles
- Lists Dana 30 JK and Dana 30 Reverse axle types
- 8640 steel forging
- Precision Gleason machining
Gear ratio and tire size
Gear ratio sets how many times the driveshaft turns for each turn of the wheels. Raising tire size often lowers effective gearing, so a numerically higher ratio can help the axle keep pulling at lower speeds. Ratio choice also affects highway cruising speed and engine rpm, so think about how the vehicle is used most often.
Ring and pinion gears are installed as a matched set and should be replaced together. Pinion depth, backlash and carrier bearing preload must be set correctly, which is usually done by an axle shop with setting tools. After break-in, check the gear contact pattern and fluid level, and watch for whine or heat that could point to a setup problem.
- Replace the ring and pinion as a matched set
- Check fluid level after break-in
- Replace bearings and seals when the carrier is opened
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | D30410RJK |
| UPC | 804314189211 |
| Gear ratio | 4.10 |
| Axle type | Dana 30 JK; Dana 30 Reverse |
| Axle location | Front |
| Popular axle manufacturer | Dana |
| Material | 8640 steel |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check your axle housing and pinion details against this set before selecting it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use a qualified axle shop for pinion depth and backlash setting, then run the gears in gradually.
What’s included
One Dana 30 front ring and pinion set. Not included: Check your bearings, carriers and seals against this set before starting the install.





