Advance Adapters has 41 parts in the Slickrock 4X4 catalog, most of them in Engine Adapters (5), Transfer Case Shifter (5), Motor Mount (4) and Drivetrain & Differential (4). The vehicles Advance Adapters parts here fit most often are the Jeep Wrangler (TJ), Jeep Wrangler (JK) and Jeep Wrangler (YJ). Advance Adapters part numbers look like "507906" and "23-0001"; each product title ends with its part number, and searching for one opens the product. Pick your vehicle at the top of the page to narrow the list to what fits.
Advance Adapters
Showing all 41 resultsSorted by popularity
-
Transfer Case Indexing Ring
Advance Adapters Transfer Case Clocking Ring – 50-8604
- Transfer case clocking ring for Jeep Dana 300 cases with 23-spline input
- Allows up to four rotations other than stock
- Adapter three-quarters of an inch thick, with a longer new input shaft
- Fits Wrangler JK, LJ, TJ and YJ
- Part number 50-8604
SKU: ADV50-8604 -
Dual Transfer Case Adapter Kit
Advance Adapters GM SM420 Transmission To Dana 18/20 Transfer Case Adapter – 50-2400
Dual Transfer Case Adapter KitAdvance Adapters GM SM420 Transmission To Dana 18/20 Transfer Case Adapter – 50-2400
- GM SM420 transmission to Dana 18 or Dana 20 transfer case adapter
- 4.50 inch long, 356-T6 aluminum alloy
- Requires a retainer and sealed bearing, sold separately
- Includes new transmission main shaft and mount block
- Part number 50-2400
SKU: ADV50-2400 -
Dual Transfer Case Adapter Kit
Advance Adapters GM 4L60E Transmission To NP231 23 Spline Transfer Case Adapter – 50-0402
Dual Transfer Case Adapter KitAdvance Adapters GM 4L60E Transmission To NP231 23 Spline Transfer Case Adapter – 50-0402
- Adapts a GM 4L60E transmission to a Jeep New Process 23-spline transfer case
- Adapter housing 3.600 inch long, aluminum alloy
- Overall transmission and adapter length 26.975 inch
- Includes output shaft, VSS sensor, reluctor ring and hardware
- Part number 50-0402
SKU: ADV50-0402 -
Bellhousing
Advance Adapters AMC TH400 to GM Engine – 716133
- Bellhousing adapter kit for mounting an AMC TH400 transmission to a GM engine, part number ADV716133.
- Fits 1974-79 Jeep vehicles, where the transmission bolts directly to the AMC engine without the factory cast iron adapter plate.
- Includes bellhousing adapter, support bushing, spacers and hardware.
- Requires a 153 or 168 tooth GM flywheel, which is not included.
SKU: ADV716133 -
Differential Pinion Yoke
Advance Adapters GM 10.5Inch 14 Bolt 1350 Pinion Yoke Kit – X11394
- Advance Adapters X11394 pinion yoke kit for GM 10.5-inch 14 bolt rear axles
- 1350 series U-joint, U-bolt style yoke
- Installs at the rear axle location.
- Sized for the GM 10.5-inch 14 bolt; check axle type before ordering.
SKU: ADVX11394 -
Differential Pinion Yoke
Advance Adapters Dana 60 1350 Pinion Yoke Kit – X11390
- Advance Adapters X11390 pinion yoke kit for Dana 60, Dana 70 and Dana 61 axles
- 1350 series U-joint, U-bolt style yoke
- Fits front and rear axle locations
- Fitment is by axle type; confirm your axle before ordering.
SKU: ADVX11390 -
-
-
Radiator
Advance Adaper Conversion Radiator – 716693-LS
- Aluminum conversion radiator, part number 716693-LS
- Cross flow design with the radiator cap on the cold side
- 1 inch core tubes, 16 fins per inch, TIG welded
- Billet filler neck for a GM overflow style cap, 15 lbs. to 22 lbs. recommended
- Two 1/4 inch male NPT x 5/16 inch inverted flare fittings included
- No vehicle fitment listed
SKU: ADV716693-LS -
Radiator
Advance Adapters Aluminum Conversion Radiator for GM V8 Engines – 716691-AA
- Aluminum conversion radiator for GM V8 engines, part number 716691-AA
- With transmission cooler and cross flow design
- 1 inch wide tubes, 16 fins per inch, 100% TIG welded
- Temperature sensor provision with a 3/8 inch NPT fitting in the cold side tank
SKU: ADV716691-AA -
Flexplate
Advance Adapters Automatic Flywheel – 716138-D
- Advance Adapters automatic flywheel, part 716138-D, for AMC 401 V8 engines
- Works with adapter 716138 only
- For GM TH350, 400 and 700R4 transmissions
- Made for a Chevy or GM torque converter
- No vehicle fitment listed; match engine and transmission first
SKU: ADV716138-D -
Transfer Case Shifter
Advance Adapters Deluxe Transfer Case Cable Shifter – 715543-231
- Fits the Jeep TJ with the NP231 transfer case
- Heavy-duty cable shifter with a robust cable
- Replaces the body mounted mechanical shift system
- Designed to correct binding and hard shifts on lifted TJs
SKU: ADV715543-231 -
-
-
Motor Mount
Advance Adapters Replacement Engine Mount Bushing Kit for Jeep – 713008-NS
- Replacement engine mount bushing kit with black rubber bushings
- Fits a broad range of Chevrolet, GMC and Jeep models
- Jeep models include XJ, WJ, ZJ, KJ, JK, LJ and TJ
- Advance Adapters part number 713008-NS
SKU: ADV713008-NS -
-
Engine Adapters
Advance Adapters GM V8 Bellhousing for GM NV4550 – 712577
- Advance Adapters GM V8 bellhousing for GM NV4550, part number 712577
- Stock GM bolt pattern
- Kit includes adapter bellhousing, dust cover plate, pilot bearing and clutch release arm
- Confirm fit for your vehicle before ordering
SKU: ADV712577 -
Engine Adapters
Advance Adapters GM V8 Bellhousing for GM NV4550 – 712576
- Advance Adapters GM V8 bellhousing for GM NV4550 transmissions, part 712576
- Stock GM bolt pattern and 5.125 index diameter
- Includes modified bearing retainer and clutch release arm
- Ball pivot installed and clutch arm boot included
- No vehicle fitment listed beyond 1996-up GM with NV4550
SKU: ADV712576 -
Engine Adapters
Advance Adapters Conversion Bellhousing – 712567
- Adapts a GM 4.3 engine to the Jeep AX15 five-speed manual transmission
- 356 T-6 aluminum bellhousing with dust cover plate and pilot bushing
- Requires separate clutch parts, sold as required options
- Designed for a GM block with a 153T flywheel
- Use kit 712567V with a 168th flywheel
SKU: ADV712567 -
Engine Adapters
V6 Manual Transmission to GM V8 Adapter Bell Housing Kit
- Advance Adapters V6 manual to GM V8 bellhousing kit, part 712561
- Adapts a GM 4.3 or 350 V8 to a 5 speed manual transmission
- Includes 356 T-6 aluminum bellhousing and clutch linkage parts
- Transmissions identified as R150F and R151F
- No vehicle fitment listed; check transmission code before ordering
SKU: ADV712561 -
Engine Adapters
Advance Adapters Chevy Bellhousing – 712548
- Advance Adapters bellhousing kit, part 712548, bellhousing depth 6.625
- Adapts Chevy V8 and 4.3 V6 engines to Jeep CJ transmissions
- Includes two special pilot bushings, dust cover plate and mounting hardware
- No vehicle fitment listed; confirm engine and transmission before ordering
SKU: ADV712548 -
Transfer Case Re-Indexing Ring
Advance Adapters Dana 300 Rotation Kit for AX-15 – 50-8603
- Advance Adapters Dana 300 rotation kit for AX-15, part number 50-8603
- Works on Jeep Dana 300 transfer cases with a 23 spline input
- Adapter is .75-inch thick with a longer input shaft
- Floorboard and shifter modification may be required
SKU: ADV50-8603 -
-
Transmission Adapters
Advance Adapters GM TH350 4WD Transmission To NP231 21Spline Transfer Case Adapter – 50-6306
Transmission AdaptersAdvance Adapters GM TH350 4WD Transmission To NP231 21Spline Transfer Case Adapter – 50-6306
- Transfer case adapter kit for 4WD GM TH350 transmissions
- Connects to an NP231 transfer case with 21-spline input
- Fits 1987–1989 Jeep XJ, Comanche and YJ
- Mainshaft not included, part number 50-6306
SKU: ADV50-6306 -
Transfer Case Output Shaft
Advance Adapters Output Shaft Kit – 50-3034
- Advance Adapters output shaft kit for the Dana 300 transfer case, part number 50-3034
- Upgrades the stock 1-1/8 in, 26 spline output to a 1-3/8 in, 32 spline shaft
- Short output shaft with a 1310 non-CV yoke
- Includes shaft, rear tail housing, yoke, bearings, seals and hardware
SKU: ADV50-3034 -
Transmission Adapters
Advance Adapters GM TH400 Transmission To Dana 20 Transfer Case Adapter – 50-0500
Transmission AdaptersAdvance Adapters GM TH400 Transmission To Dana 20 Transfer Case Adapter – 50-0500
- TH400 transmission to Dana 20 transfer case adapter for listed 1972-1979 Jeep CJ5, CJ6 and CJ7 models
- Replaces the factory Jeep adapter; 356 T-6 heat treated aluminum alloy
- Keeps the original transmission mount and length
- Kit includes housing, 15 tooth coupler shaft, bearing, gaskets, seal and hardware
SKU: ADV50-0500 -
Transfer Case Shifter
Advance Adapters Dana 300 DeluxeTwin Stick Shifter – 403300
- Advance Adapters 403300 Dana 300 DeluxeTwin stick shifter kit
- Five configurations: 2WD High, 4WD High, 4WD Low, Rear Low, Front Low
- Requires new shift rails in the transfer case
- Universal-type kit; handles may need bending
SKU: ADV403300 -
-
Transfer Case Shifter
Advance Adapters JK Atlas II Shifter – 303008L
- Atlas II shifter for the 2007–2016 Jeep Wrangler (JK) per the manufacturer list
- Designed for 2 and 4-door models
- For use only with the Atlas II transfer case, not the factory transfer case
- Needs a computer interface for the drivetrain low range switch
SKU: ADV303008L -
-
Speedometer Drive Gear
Advance Adapters Atlas Speedometer Housing Assembly – 301506
- Speedometer pinion gear holder for 1982–1986 Jeep CJ vehicles
- Works with Atlas and Dana 300 transfer cases
- Billet aluminum, machined to factory OEM specifications
- Replaces the discontinued OEM holder S-2538608
- Part number 301506, UPC 70000423917
SKU: ADV301506 -
Transfer Cases and Replacement Parts
Advance Adapters Atlas Control Module – 300377
- Control module for the Atlas transfer case upgrade on 2007–2016 Jeep Wrangler JK
- Keeps dash lights, ESP settings and lockers working
- Designed for the Atlas 2-speed; usable on a 4-speed
- For cases built before August 2014
- Part number 300377
SKU: ADV300377 -
-
Transfer Case Slip Yoke Eliminator Kits and Hardware
Advance Adapters Transfer Case Slip Yoke Eliminator Kit – 50-7906
Transfer Case Slip Yoke Eliminator Kits and HardwareAdvance Adapters Transfer Case Slip Yoke Eliminator Kit – 50-7906
- Advance Adapters 50-7906 slip yoke eliminator kit for NP231 transfer cases
- Heavy-duty output shaft with a 54% increase in torque capacity
- Includes aluminum rear output housing, bearings, seals, snap rings and bolts
- Replacement yoke type 1310 CV style; CV rear drive shaft required
SKU: ADV50-7906 -


































