Overview
The Advance Adapters 50-6304 is a transmission adapter kit for a 1973-85 GM TH 350 four wheel drive transmission. It joins the transmission to a Dana 300 or NP231 transfer case with a 23 spline input shaft. It fits the 1987-95 YJ New Process transfer case and the 1980-86 CJ Dana 300 transfer case.
The kit requires driveline modifications, and the listed adapter thickness is 3.650.
Key features
- Adapts a GM TH 350 four wheel drive transmission to a Dana 300 or NP231 transfer case
- Driveline modifications are required.
- Includes a new mainshaft and all mounting hardware
- Part number 50-6304 with UPC 808331004816
Setting up a TH 350 swap
A TH 350 swap changes the transmission output height and the rear mounting point, so the transfer case has to be positioned carefully. Driveline angles are the first thing to check. Small changes in angle can cause vibration at speed and wear on the transfer case input and U-joints, especially when the transmission is raised or lowered.
Start by checking the mainshaft fitment and spline count on the transfer case you plan to use. Inspect the crossmember and mounts for cracks before installing the adapter, and replace worn rubber mounts while the drivetrain is accessible. Keep the flexplate, shifter bracket and vacuum modulator with the rest of the parts so they are installed in order. Recheck driveline clearance after the first test drive, since engine and transmission movement settles over the first few miles.
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | 50-6304 |
| UPC | 808331004816 |
| Transmission | GM TH 350, 1973-85, 4 wheel drive |
| Transfer case | Dana 300 or NP231, 23 spline input shaft |
| Adapter thickness | 3.650 |
| Included | New mainshaft and mounting hardware |
Vehicle fitment
It fits the 1987-95 YJ with a New Process transfer case and a 23 spline input shaft. It also fits the 1980-86 CJ Dana 300 transfer case.
Check the year, model and trim of a 1980 to 1986 CJ against this kit before ordering.
Installation notes
The kit requires driveline modifications, so have the driveline angles checked after installation. Additional parts for this kit are transfer case mount 716021 for CJ or 716008 for YJ, vacuum modulator 716010, shifter bracket 715523, and Chevy small block flexplate G104 for 283-350.
What’s included
A new mainshaft and mounting hardware.
Not included: Transfer case mounts 716021 or 716008, vacuum modulator 716010, shifter bracket 715523 and flexplate G104 are not included.









