Overview
The Advance Adapters 23-0001 is a flexible transmission dipstick kit with a Teflon lined, braided stainless outer housing, designed for push in style transmissions. The kit includes a flexible inner dipstick cable, a billet aluminum handle and fittings, and a funnel adapter for filling.
The firewall mount measures 24 inches in length, and the kit is designed to work alongside Lokars flexible engine dipsticks.
Key features
- Teflon lined, braided stainless outer housing
- Heat resistant flexible inner dipstick cable
- Inner cable marked with transmission fluid levels
- Billet aluminum handle and fittings
- Dipstick funnel adapter included for filling
- O-ring seals at the dipstick
Using a flexible dipstick
A flexible dipstick runs from the engine bay to a handle mounted on the firewall, so you can check transmission fluid without reaching the transmission itself. The braided housing keeps the inner cable from kinking, and the sealed route through the firewall keeps the cable away from hot exhaust and moving parts. Routing matters more than most owners expect.
When fitting, keep the housing free of sharp bends and clear of the exhaust, and check that the tube does not rub against the driveshaft or steering components. Fluid checks are most accurate at the operating temperature your transmission’s service procedure requires, so follow that process.
Over time, the O-rings and the funnel adapter can wear, so inspect them whenever the fluid is checked. A worn seal can let fluid weep at the handle or the tube. Replace any seal that feels hard, cracked or flattened.
- Route the housing clear of exhaust heat
- Check O-rings for hardening at each fluid check
- Avoid sharp bends in the braided housing
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | 23-0001 |
| UPC | 70000253915 |
| Outer housing | Teflon lined braided stainless |
| Inner cable | Heat resistant flexible cable with fluid level markings |
| Handle and fittings | Billet aluminum |
| Firewall mount length | 24 inches |
| Seals | O-rings |
| Compatibility | Push in style transmissions |
Vehicle fitment
It is designed for push in style transmissions, so the transmission type matters more than the vehicle brand. Confirm the transmission type before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the transmission is a push in style before fitting, since the kit is designed for that type. The inner cable is molded with trans fluid levels, so read those marks when checking fluid.
What’s included
Braided stainless outer housing, flexible inner dipstick measuring cable, billet aluminum handle, billet aluminum fittings, dipstick funnel adapter, and O-ring seals.









