Overview
It is a rear pinion yoke kit, part number X11394, for GM 10.5-inch 14 bolt axles. It has a U-bolt style yoke and fits the 1350 series U-joint.
It is designed to handle strong engine output and larger tires.
Key features
- Designed for GM 10.5-inch 14 bolt rear axles
- U-bolt style yoke
- 1350 series U-joint compatibility
- Rear axle location
Before you buy
A pinion yoke connects the driveshaft to the pinion gear, so its fit and condition affect the whole rear driveline. When you replace one, check the yoke bore and splines for wear, since a worn yoke can let the U-joint move under load and cause vibration.
Pinion yoke kits are often replaced together with the pinion nut, pinion seal and U-joint. A new seal is a good time to inspect pinion bearing preload and confirm the driveshaft angle still suits your suspension height. Larger tires and stronger engines put more torque through the driveline, so it pays to inspect the yoke more often.
- Check the old yoke for grooves or heat marks
- Replace the pinion seal when the yoke is removed
- Use a new pinion nut and torque it to specification
- Re-check the bolts after the first few trail runs
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | X11394 |
| UPC | 700007243891 |
| Axle location | Rear |
| Axle type | GM 14 bolt 10.5 inches |
| U-joint series | 1350 series |
| Yoke style | U-bolt style |
Vehicle fitment
Fitment is by axle, not by vehicle. The kit is sized for the GM 10.5-inch 14 bolt rear axle, and no vehicle years or models are named.
Confirm your axle housing is a GM 10.5-inch 14 bolt before fitting. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.









