Overview
The Advance Adapters GM V8 bellhousing, part 712576, has the stock GM bolt pattern and is made for the GM NV4550 transmission. It has a 5.125 index diameter and is built for 1996-up GM vehicles with that transmission.
The kit comes with its own dust cover plate, modified bearing retainer, special pilot bearing and clutch release hardware. All parts are supplied as a complete set with instructions.
Key features
- Stock GM bolt pattern
- 5.125 index diameter
- Modified bearing retainer included
- Ball pivot installed and clutch arm boot included
- Additional mounting hardware and instructions included
Clutch release basics
The clutch release system is what lets you disengage the drivetrain, so its condition matters once the adapter is in place. Check that the release arm pivots smoothly on the ball pivot and that the boot seals fully against the bellhousing. A stiff arm or torn boot lets dirt in and makes the pedal feel heavy over time.
Many builders replace the clutch disc, pressure plate and release bearing at the same time as the adapter. Doing so avoids a second teardown and keeps the new alignment from being disturbed. Clean mating surfaces before bolting the bellhousing so the fit stays true, and inspect the flywheel for heat cracks or scoring.
- Check pedal feel after bleeding the hydraulics
- Keep the dust cover plate sealed against road grime
- Replace a torn clutch arm boot promptly
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | 712576 |
| UPC | 70000002180 |
| Index diameter | 5.125 |
| Bellhousing depth | 6 and 5/16 |
| Bolt pattern | Stock GM |
| Transmission | GM NV4550 |
Vehicle fitment
It is built for 1996-up GM vehicles with an NV4550 transmission. Compare your transmission and bellhousing pattern against the kit before ordering.
Confirm that your vehicle has an NV4550 transmission and a 5.125 index diameter. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The ball pivot arrives installed. Use the included instructions when fitting the clutch release arm, clutch arm boot and dust cover plate, and check the release arm sits freely before final assembly.
What’s included
The kit includes one adapter bellhousing, one dust cover plate, one modified bearing retainer, one special pilot bearing, one clutch release arm, one ball pivot (installed), one clutch arm boot, additional mounting hardware and instructions.
Not included: the NV4550 transmission and the clutch and flywheel parts.









