Overview
The Advance Adapters Atlas control module, part number 300377, keeps the stock functions working when a 2007 to 2016 Jeep Wrangler JK is upgraded to an Atlas transfer case. The module is needed to keep the factory 4WD functions working after the swap.
The module lights the dash lights in both high and low range, and it keeps the ESP settings working when the vehicle is in 4WD. On Rubicon models it also runs the lockers and the sway bar disconnect. Advance Adapters designed the module for the Atlas 2-speed transfer case. It can be used on a 4-speed case, but there is no provision for connecting an additional low range switch in the planetary housing.
Key features
- Keeps stock dash lights working in high and low range
- Keeps ESP settings working in 4WD
- Controls the lockers and sway bar disconnect on Rubicon models
- Designed for the Atlas 2-speed transfer case
- Usable on a 4-speed case, without a low range switch connection
- Intended for cases built before August 2014
Dash lights and locker wiring
Transfer case upgrades change the signals the vehicle’s electronics expect, so a control module acts as the link between factory wiring and new hardware. Before installation, confirm which circuits the vehicle uses for dash illumination, stability control and locker operation, and label each connector so problems can be traced later.
The build date and case type should be confirmed before wiring, because connections on a 4-speed case differ from a 2-speed setup. Keep the harness routed away from exhaust heat and moving linkage. After installation, test the dash lights in both range positions, the stability control indicator and any locker switches before taking the vehicle off road.
- Test each range position before driving
- Keep connectors dry and sealed
- Recheck wire routing after the first trail run
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | 300377 |
| UPC | 70000656539 |
| Product type | Atlas control module |
| Works with | Atlas 2-speed transfer case (4-speed with limits) |
| Case build date | Cases built before August 2014 |
| Body style | 2-door and 4-door models |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007 to 2016 Jeep Wrangler JK, 2-door and Unlimited, as an upgrade to the Atlas transfer case.
Close vehicles that are not on the list include the Wrangler JK from 2017 on and the Wrangler JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The module connects the stock dash, ESP and locker circuits to the Atlas transfer case. If the case is a 4-speed, the low range switch in the planetary housing cannot be connected, so check the case type before wiring.
What’s included
This is the control module only. Check the package contents against your installation before starting.









