Overview
The Advance Adapters X11390 is a pinion yoke kit with a U-bolt style yoke for the 1350 series U-joint. It fits Dana 60, Dana 70 and Dana 61 axles at the front or rear location.
Its design targets high horsepower engines and big tires.
Key features
- U-bolt style yoke
- Matches the 1350 series U-joint
- It fits front and rear axle locations.
- Covers Dana 60, Dana 70 and Dana 61 axle types
Matching the yoke to your axle
A U-bolt style yoke clamps to the pinion with U-bolts rather than straps, so the fit depends on the pinion spline and the housing. Dana 60, 70 and 61 axles use different pinion arrangements, so confirming the housing before ordering avoids a yoke that will not seat properly.
High horsepower engines and large tires place extra load on the driveline, which makes the yoke, U-joint and pinion nut worth inspecting at regular intervals. Look for play at the U-joint, cracks near the U-bolt seats and loosening of the nut. Replacing a worn U-joint at the same time is a sensible choice. Keeping the U-bolts tight after the first few drives helps the clamp hold its position.
- Confirm the Dana 60, 70 or 61 housing
- Check U-joint play at each service
- Re-tighten U-bolts after initial use
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | X11390 |
| UPC | 700007243911 |
| Axle location | Front or rear |
| Axle type | Dana 60, Dana 70, Dana 61 |
| U-joint series | 1350 series |
| Yoke style | U-bolt style |
Vehicle fitment
Fitment is by axle type, not by vehicle. The kit covers Dana 60, Dana 70 and Dana 61 axles, so confirm your axle type before ordering.
Vehicles with other axle types are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the U-joint is 1350 series before fitting this yoke.
What’s included
Check the package contents against your installation before starting.









