Select your vehicle
-13%

Advance Adapters GM 4L60E Transmission To NP231 23 Spline Transfer Case Adapter – 50-0402

Advance Adapters

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Adapts a GM 4L60E transmission to a Jeep New Process 23-spline transfer case
  • Adapter housing 3.600 inch long, aluminum alloy
  • Overall transmission and adapter length 26.975 inch
  • Includes output shaft, VSS sensor, reluctor ring and hardware
  • Part number 50-0402

Description

Overview

It joins a GM 4L60E automatic to a Jeep New Process NP231 transfer case with a 23-spline input shaft. It is made for a GM 4L60E with a non-removable bellhousing.

The adapter housing is 3.600 inch long, and the overall length of the transmission with the adapter fitted is 26.975 inch. The housing is made from 356-T6 heat-treated aluminum alloy and has a provision for a transmission mount, so the transmission can be supported from the adapter.

It fits Jeep New Process transfer cases with a 23-spline input shaft. A long 23-spline input measuring 2.120 inch must be shortened so it protrudes 1.5 inch from the front of the transfer case before the adapter is fitted. This shortening is the main difference between a standard and a long input shaft.

Key features

  • Connects a GM 4L60E transmission to a New Process 23-spline transfer case
  • Adapter housing 3.600 inch long; transmission and adapter together 26.975 inch
  • 356-T6 heat-treated aluminum alloy housing
  • Provision for a transmission mount
  • Kit includes a 4L60E 23-spline output shaft and a GM VSS sensor with reluctor ring

Measuring before installation

Before buying or fitting any transmission-to-transfer-case adapter, measure the whole stack. Adapter length changes how far the transfer case sits from the transmission, and that affects the driveline, the transmission mount and the crossmember. Confirm there is room for the transfer case to move on its mounts and that the crossmember can be reached once everything is in place.

Fluid and sensors are easy to overlook. Check the transmission fluid level after the first drives, and inspect the seals where the adapter meets the housings. Keep the speed sensor wiring clear of heat and moving parts so it stays reliable.

  • Measure transmission and transfer case length together
  • Check the crossmember and mount clearance
  • Inspect seals and fluid level after the first drives

Specifications

Brand Advance Adapters
Part number 50-0402
Adapter length 3.600 inch
Overall length (transmission with adapter) 26.975 inch
Housing material 356-T6 heat-treated aluminum alloy
Transmission GM 4L60E, non-removable bellhousing
Transfer case Jeep New Process NP231, 23-spline input
Long input shaft 2.120 inch, shortened to protrude 1.5 inch
Included Adapter housing, 4L60E 23-spline output shaft, GM VSS sensor, reluctor ring, O-ring, gasket, fastening hardware and instructions

Vehicle fitment

This adapter is not a vehicle-specific part. It is designed for one transmission and one transfer case type: a GM 4L60E with a non-removable bellhousing, and a Jeep New Process transfer case with a 23-spline input. Advance Adapters marks the adapter universal fit, but it only matches that pairing, so check both before ordering. Confirm your vehicle’s year, model and trim before ordering.

No vehicle years or models are given for this adapter, so check the transmission and transfer case rather than a model year.

Installation notes

Shorten a long 23-spline input (2.120 inch) so it protrudes 1.5 inch from the front of the New Process case before fitting the adapter. Use the included O-ring and gasket with the fastening hardware, and follow the adapter instructions for the sensor and reluctor ring.

What’s included

The kit includes the adapter housing, the 4L60E 23-spline output shaft, the GM VSS sensor, the reluctor ring, an O-ring, a gasket, fastening hardware and adapter instructions. The transmission and transfer case are not included.

Questions & Answers

Does the 50-0402 fit a GM 4L60E with a removable bellhousing?

No. The adapter is made for a GM 4L60E with a non-removable bellhousing. Check the bellhousing on your transmission before ordering.

Will this adapter fit a New Process transfer case with a 23-spline input?

Yes. It fits Jeep New Process transfer cases with a 23-spline input shaft. A long input measuring 2.120 inch must first be shortened so it protrudes 1.5 inch from the front of the case.

What is the overall length with this adapter fitted?

Advance Adapters gives 3.600 inch for the adapter itself. With the GM 4L60E attached, the overall length of the transmission and adapter is 26.975 inch.

Can an adapter change driveline angles?

Possibly. Changing the spacing between the transmission and transfer case can alter driveshaft angles, so check the angles and the u-joints after installation, and watch for vibration on the first drives.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon