Overview
The Advance Adapters GM V8 Bellhousing, part number 712577, is a bellhousing for the GM NV4550 transmission with a stock GM bolt pattern. It comes as a kit with the adapter bellhousing, clutch release components and mounting hardware for a GM V8 application. Match your engine and NV4550 transmission combination before ordering.
Key features
- Stock GM bolt pattern
- Includes a special pilot bearing
- Clutch release arm with a ball pivot, installed
- Dust cover plate and clutch arm boot included
- Additional mounting hardware in the kit
Before you buy
A bellhousing sits between the engine and transmission and carries the clutch release components, so its alignment affects how smoothly the clutch engages and how long the pilot bearing lasts. When the transmission is a new pairing, check the input shaft spline, bolt holes and the position of the clutch fork before committing to a build. Small misalignment can cause vibration and early wear on the clutch disc.
Clutch parts are often replaced together. A new clutch disc, pressure plate and release bearing are worth considering when the bellhousing is changed, since the clutch is already exposed. Inspect the throwout bearing, the release arm pivot and the boot for cracks or grease loss. Check the flywheel face for scoring at the same time.
- Inspect the pilot bearing for play before assembly
- Look for oil leaks around the input shaft seal
- Replace a worn pivot ball rather than reusing it
- Confirm the clutch disc is sized for the transmission
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | 712577 |
| UPC | 70000002181 |
| Bolt pattern | Stock GM |
| Bellhousing depth | 6 and 5/15 (unit not stated) |
| Transmission | GM NV4550 |
| Engine | GM V8 |
Vehicle fitment
Match your GM V8 engine and NV4550 transmission combination before ordering. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting instructions come with the kit, so follow them during installation. Confirm the bellhousing depth, which is 6 and 5/15 with no unit, against your engine and transmission before assembly. Disconnect the battery before removing the transmission.
What’s included
The kit includes one adapter bellhousing, one dust cover plate, one special pilot bearing, one clutch release arm, one ball pivot (installed), one clutch arm boot, and additional mounting hardware, plus instructions.
Not included: The engine, transmission and clutch disc are not part of the kit.









