Overview
The Advance Adapters 50-6303 is a transmission-to-transfer-case adapter kit. It connects a GM 700R-4 automatic, also called a 2WD TH700R, to a Dana Model 300 transfer case in a Jeep.
It may also require the transfer case adapter crossmember kit, part 716021. Confirm the transmission and transfer case match your vehicle before using the kit.
Key features
- Adapts a GM 700R-4 automatic to a Dana 300 transfer case
- Kit includes adapter housing, spud shaft, main shaft and bearing
- Mounting hardware and instructions are included
- Part number 50-6303 with UPC 808331004809
Mount and driveline checks
An adapter kit like this one bridges the transmission output and the transfer case input, so the alignment of the two housings sets the driveline geometry. A small offset between the output shaft and the transfer case input can cause vibration at speed and early wear on the input bearing. Check the adapter housing for fit before the transmission goes in, and measure the setup after the first installation.
Transfer case crossmembers and mounts are often replaced when the drivetrain changes, because factory mounts are placed for the original transmission height. Inspect the crossmember for cracks and the rubber mounts for compression before trusting the new setup. Driveshaft lengths and angles should be checked after the drivetrain is assembled and the vehicle is at ride height. Keep the instruction sheet and hardware together during installation so no fasteners are mixed up.
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | 50-6303 |
| UPC | 808331004809 |
| Transmission | GM 700R-4, 2WD (also called TH700R) |
| Transfer case | Dana Model 300 |
Vehicle fitment
The kit connects a GM 700R-4 automatic to a Dana 300 transfer case for a Jeep. Confirm the vehicle year, model and trim separately before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit may need the transfer case adapter crossmember kit, part 716021, so check the mount setup before installing the transmission. New mounting hardware and instructions are included.
What’s included
Adapter housing, spud shaft, main shaft, bearing, mounting hardware and instructions.
Not included: Transfer case adapter crossmember kit, part 716021, which may be required.








