Overview
The Advance Adapters bellhousing kit, part 712548, is a bellhousing for mating Chevy V8 and 4.3 V6 engines to Jeep CJ transmissions, with a bellhousing depth of 6.625. The kit description lists 1976-79 T-150, 1980-86 SR-4, T-4, T-5 and T-176/177 transmissions, and names 1957-95 Chevy V8s and the 4.3 V6 as the engines.
Setup needs parts that are not in the box: a stock GM 168 or 153 tooth flywheel, a 10-1/2 or 11 conversion disc and clutch cover assembly, and release bearing 614038. Hydraulic clutch systems also need a 1980-83 GM 4 cylinder slave cylinder and hose.
Key features
- Bellhousing depth of 6.625
- Two special pilot bushings included
- Dust cover plate and mounting hardware included
- It is designed to fit without driveline modifications.
Planning a bellhousing swap
A bellhousing swap changes the whole driveline, not just one part. The bellhousing sets the connection between the engine and transmission, so the flywheel, clutch disc, pilot bearing and release components all need to match the new setup. Work through each part before assembling the drivetrain.
Hydraulic clutch systems have their own fittings and lines, so plan the slave cylinder and hose before mounting the transmission. Check clearance around the bellhousing, the crossmember and the floor pan, and mock up the assembly to confirm the fit before tightening the bolts.
Starter position and nose cone clearance are often the surprise in this type of swap. Verify that the starter clears the frame and the bellhousing before final assembly, and plan extra time for alignment checks.
- Mock up the assembly before final tightening
- Check starter clearance
- Verify slave cylinder fittings
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | 712548 |
| UPC | 808331009880 |
| Bellhousing depth | 6.625 |
| Engines | 1957-95 Chevy V8s and 4.3 V6 |
| Transmissions | 1976-79 T-150, 1980-86 SR-4, T-4, T-5 and T-176/177 (Jeep CJ) |
| Input shaft | New 6 cylinder input shaft, part 81314, required |
| Pilot bushings | 2 special |
Vehicle fitment
Match your engine and transmission to the specifications above rather than to a vehicle year, make or model.
This kit does not cover the NV4550 or other transmissions. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The starter nose cone must be changed to the 1984097 168 nose cone. The kit needs a stock GM 168 or 153 tooth flywheel, a 10-1/2 or 11 conversion disc and clutch cover assembly, and release bearing 614038. Hydraulic systems also need the 1980-83 GM 4 cylinder slave cylinder and hose.
What’s included
The kit includes the bellhousing, 2 special pilot bushings, dust cover plate and mounting hardware.
Not included: the flywheel, conversion disc and clutch cover assembly, release bearing 614038, slave cylinder and hose, the 6 cylinder input shaft part 81314, and the 1984097 168 nose cone.









