Overview
The Advance Adapters 50-0500 is a GM TH400 transmission to Dana 20 transfer case adapter kit, a replacement for the factory adapter assembly on Jeep vehicles equipped with the AMC TH400 and Dana 20 transfer case.
The factory adapter assembly is known to be weak and prone to breaking. This kit replaces the original Jeep adapter, keeps the original Jeep transmission mount and matches its length. The adapter housing is made from 356 T-6 heat treated aluminum alloy.
Key features
- Adapts the TH400 transmission to the Dana 20 transfer case
- Replaces the original Jeep adapter
- 356 T-6 heat treated aluminum alloy adapter
- Retains the original Jeep transmission mount and is identical in length
- New coupler shaft with 15 teeth
- Includes housing, bearing, snap rings, gaskets, seal, hardware and instructions
Before the adapter swap
An adapter between a transmission and transfer case carries the full engine torque, so the condition of the surrounding drivetrain matters. Inspect the transmission output, the transfer case input and the driveshafts for wear, play or leaks before fitting new parts. Worn yokes and damaged splines can make a new adapter feel rough, even when the adapter itself is sound.
Because the coupler shaft is replaced with the kit, check that mating parts engage properly before the transfer case is fully bolted in place. Fluid types and levels should match what the transmission and transfer case need after the swap. A short test drive that shifts through every gear and range helps catch problems early, and rechecking bolts after the first miles keeps the joint secure.
- Inspect driveshaft yokes for play
- Check transmission output for leaks
- Confirm fluid types after the swap
- Shift through all gears on a short test drive
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | 50-0500 |
| UPC | 70000253505 |
| Product type | Transmission to transfer case adapter kit |
| Application | AMC TH400 to Jeep Dana 20 |
| Adapter material | 356 T-6 heat treated aluminum alloy |
| Coupler shaft | New, 15 teeth |
| Transmission mount | Retains original Jeep mount |
| Length | Identical to the original adapter |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1972–1979 Jeep CJ5 (Base, Golden Eagle, Renegade), 1972–1975 CJ6 (Base) and 1976–1979 CJ7 (Base, Golden Eagle, Renegade) with the AMC TH400 and Dana 20 combination.
The kit is for TH400 and Dana 20 combinations only. The individual components of this kit will not work with the stock Jeep adapter parts, and the list does not cover CJ models after 1979. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drivetrain adapter work is major mechanical work, so professional installation is a sound choice. Use all supplied hardware, torque fasteners to the correct values, support the drivetrain safely during the job, refill fluids as needed, and re-check fasteners and fluid levels after the first miles of driving.
What’s included
An adapter housing, a new 15 tooth coupler shaft, a bearing, snap rings, gaskets, a seal, fastening hardware and adapter instructions.
Not included: The transmission, the transfer case and drivetrain fluids.








