Overview
The Advance Adapters 50-8604 is a clocking ring for the Dana 300 transfer case. It lets the case be rotated to a higher-than-stock position on Jeep applications, which is useful where ground clearance is a concern. It works on Jeep Dana 300 transfer cases with a 23-spline input.
The kit allows up to four different rotations other than stock. It keeps the proper spline engagement and indexing for the Dana 300, and it includes a new, longer input shaft to suit the thicker adapter.
Key features
- Lets the Dana 300 be clocked to up to four positions other than stock
- Adapter is three-quarters of an inch thick
- Includes a new, longer input shaft for the Dana 300
- Keeps proper spline engagement and indexing
- Works with Jeep Dana 300 transfer cases with a 23-spline input
Driveline geometry after clocking
Clocking a transfer case changes the angle of its output relative to the transmission, which changes the driveshaft geometry. A higher-than-stock position can shorten the distance between the transfer case and the axle, and that alters the angle of both driveshafts. Measure the angles after installation, and inspect the u-joints for wear, especially if the vehicle has been lifted.
Vibration is the first symptom of a driveline that is out of phase or out of angle. A mild buzz at highway speed often comes from a shaft running at too steep an angle, while a shudder during acceleration can point to a worn joint. Address the cause rather than adding weight or spacers to hide the symptom.
- Measure driveshaft angles after clocking
- Inspect u-joints and slip yokes for wear
- Check for vibration at highway and low speeds
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | 50-8604 |
| Transfer case | Dana 300 |
| Input spline | 23 spline |
| Adapter thickness | Three-quarters of an inch |
| Rotations | Up to four other than stock |
| Included | New, longer input shaft |
Vehicle fitment
It is made for the 2007–2018 Jeep Wrangler (JK), 2004–2006 Jeep Wrangler (LJ), 1997–2006 Jeep Wrangler (TJ) and 1987–1995 Jeep Wrangler (YJ). It does not cover the Cherokee or Grand Cherokee. Confirm fit for your vehicle’s year, model and trim before ordering.
The ring will not work with adapter kits that use a 27- or 32-spline input into a Dana 300.
Installation notes
Floorboard and shifter modification may be required. Check clearance before fitting.
What’s included
The kit includes the clocking ring and a new, longer input shaft for the Dana 300.









