Overview
The 716176 is a clutch release arm in the straight cast iron style, built to accept a groove-type throw out bearing. It uses the straight cast iron GM arm design, GM part number 3765372, as its reference.
Key features
- Cast iron construction
- Straight arm design
- Accepts groove-type throw out bearings
- Matches the GM arm, GM part number 3765372
Clutch linkage basics
The release arm is the lever that pushes the throw out bearing against the clutch diaphragm fingers when the pedal is pressed. Its job is to move the bearing straight and evenly, so the clutch releases cleanly. Arm geometry, pivot points and the bearing style all have to work together, which is why matching the arm to the bearing and linkage matters before installation.
Cast iron arms are heavy and stiff, which helps them hold position under load. Over time the pivot and contact surfaces can wear, and a worn arm may let the bearing sit off center. Signs to watch for include a clutch pedal that feels uneven, a release point that changes, or noise from the bearing area. When replacing the arm, inspect the pivot, the fork and any retaining clips at the same time.
- Confirm the bearing is the groove type before fitting
- Inspect the pivot and contact surfaces for wear
- Replace retaining clips that look bent or weak
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | 716176 |
| UPC | 70000002102 |
| Material | Cast iron |
| Arm style | Straight |
| Bearing type | Groove-type throw out bearing |
| Reference part | GM part number 3765372 |
Vehicle fitment
Match the arm to your clutch linkage, and confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the arm is made for a groove-type throw out bearing, check the bearing type before installing the arm.
What’s included
The release arm only. Check whether a throw out bearing is needed for your installation before starting.









