Overview
The Advance Adapters ADV716133 is a bellhousing adapter kit for mounting an AMC TH400 transmission to a GM engine. It fits 1974-79 Jeep vehicles, where the transmission bolts directly to the AMC engine without a factory cast iron adapter plate.
The kit replaces that factory adapter plate and supplies the bushing, spacers and hardware needed for the mount. A 153 or 168 tooth GM flywheel is also required, so confirm the flywheel and bolt pattern match your engine and transmission before installing.
Key features
- Bellhousing adapter mounts an AMC TH400 transmission to a GM engine.
- Replaces the factory cast iron adapter plate used on 1974-79 Jeep applications.
- Support bushing and spacers are included with the kit.
- Hardware is included; a 153 or 168 tooth GM flywheel must be supplied separately.
Planning a bellhousing swap
Swapping a transmission behind a different engine means more than bolting on an adapter. The input shaft must line up with the crankshaft and the flywheel, and the transmission must clear the crossmember and floor opening. Driveshaft length and yoke fit often change when the transmission position changes, so measure before ordering parts that depend on it. Use a transmission jack and support the unit carefully during the fit check.
Plan for supporting hardware as well. Worn or missing engine and transmission mounts can put stress on the bellhousing and cause misalignment. Inspect the crankshaft pilot, the pilot bushing if one is used, and the flywheel ring gear before fitting. Check that the starter clears the new bellhousing and that the shifter linkage reaches the transmission. Clean mating surfaces and tighten all bolts evenly.
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | ADV716133 |
| Transmission | AMC TH400 |
| Engine | GM |
| Flywheel required | 153 or 168 tooth GM flywheel (not included) |
Vehicle fitment
It is built for 1974-79 Jeep vehicles, but no specific Jeep model or trim is named. Confirm your model, year and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 153 or 168 tooth GM flywheel is needed to complete the assembly. Confirm the bellhousing and flywheel match before bolting the transmission in place.
What’s included
The kit includes a bellhousing adapter, support bushing, spacers and hardware.
Not included: A 153 or 168 tooth GM flywheel.









