Overview
The Advance Adapters Conversion Bellhousing, part number 712567, is an adapter kit that bolts a GM 4.3 engine to the Jeep AX15 five-speed manual transmission. It is designed for a GM block with a 153T flywheel, meaning a 153-tooth flywheel.
The kit is built around a 356 T-6 aluminum bellhousing. It includes a universal dust cover plate, pilot bushing, AX15 bearing retainer assembly, seal, throw-out arm, slave cylinder push rod and push rod end, ball pivot, fastening hardware and adapter instructions. The clutch parts needed to complete the setup are sold separately and are not in the box.
The AX15 was used in model years 1989 to 1999 and has an overall case length of 24.00 inch. Its output shaft has a positive stick out and 23 splines. It was coupled to the Jeep 4.0L engine, and the input pilot tip differs by year: 1989 to 1995 units use a pilot tip of five hundred ninety thousandths of an inch, and 1997 to 1999 units use seven hundred fifty thousandths of an inch.
Key features
- Adapts a GM 4.3 engine to the Jeep AX15 five-speed manual transmission
- 356 T-6 aluminum bellhousing
- Universal dust cover plate
- Pilot bushing and AX15 bearing retainer assembly
- Throw-out arm, slave cylinder push rod and push rod end, and ball pivot
- Fastening hardware and adapter instructions included
Clutch and flywheel matching
A bellhousing is only part of a conversion. The flywheel, clutch disc, pressure plate and release bearing all have to match the engine and each other, and the pilot tip has to suit the transmission input shaft. Measure the flywheel tooth count before ordering, and confirm the clutch diameter matches the pressure plate.
Misaligned throw-out arms wear the release bearing quickly, so check that the arm moves freely through its full travel. Clean the bellhousing bore and dowel locations before bolting the housing to the engine block, and use the correct torque on the bolts. Bleed the hydraulic line completely after installing the slave cylinder so the clutch engages cleanly.
- Confirm flywheel tooth count before ordering
- Match clutch diameter to the pressure plate
- Check throw-out arm travel by hand
- Bleed the hydraulic line after installation
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | 712567 |
| UPC | 808331010183 |
| Bellhousing material | 356 T-6 aluminum |
| Engine | GM 4.3 with a 153T flywheel |
| Transmission | Jeep AX15, five-speed manual |
| Transmission case length | 24.00 inch |
| Output shaft | Positive stick out, 23 splines |
| Input pilot tip, 1989 to 1995 | Five hundred ninety thousandths of an inch |
| Input pilot tip, 1997 to 1999 | Seven hundred fifty thousandths of an inch |
| Clutch size for listed options | 10.5 inch |
Vehicle fitment
It fits a GM 4.3 engine with a 153T flywheel and the Jeep AX15 five-speed manual transmission, used in model years 1989 to 1999. Check your engine, flywheel and transmission before ordering.
Installation notes
With a 168th flywheel on a GM 4.3, header interference with the slave cylinder and throw-out arm can occur. For that setup, use kit 712567V instead, and have a muffler shop custom make an exhaust down pipe. Professional installation is recommended for an engine-to-transmission conversion.
What’s included
The kit includes the 356 T-6 aluminum bellhousing, universal dust cover plate, pilot bushing, AX15 bearing retainer assembly, seal, throw-out arm, slave cylinder push rod and push rod end, ball pivot, fastening hardware, and adapter instructions.
Not included: the required clutch options: slave cylinder 716213, 10.5 inch clutch disc 383271, throw-out bearing N1430, and 10.5 inch pressure plate CF360056. The engine, flywheel and transmission are also not included.









