Overview
The Advance Adapters 50-6306 is a transfer case adapter kit that connects a GM TH350 4WD transmission to an NP231 transfer case with a 21-spline input. It fits the 1987–1989 Jeep Cherokee (XJ), Comanche and Wrangler (YJ).
The adapter does not include the mainshaft, so plan on sourcing one separately.
Key features
- Adapts a 4WD GM TH350 transmission to an NP231 transfer case
- 21-spline transfer case connection
- Kit for 4WD GM TH350 transmissions
- Fits 1987–1989 Jeep XJ, Comanche and YJ models
Choosing a transfer case adapter
A transfer case adapter sets the height and position of the transfer case relative to the transmission, so the connection has to be square and secure. When a swap changes either component, the output shaft height and driveshaft angles often change as well. Those changes show up as vibration, U-joint wear and a different feel under acceleration, which is why the setup is checked after the first drive.
Because this kit leaves out the mainshaft, a shop that sources one should confirm its spline count and length against the adapter and the NP231 input before buying. Mounts and crossmembers may need attention too, since a different transmission length can move the drivetrain. Recheck fasteners after the first few trail runs, and keep an eye on the seals at the adapter seam.
- Confirm the transmission and transfer case match the adapter
- Check driveshaft angles after installation
- Inspect old mounts for cracking before reusing them
Specifications
| Brand | Advance Adapters |
|---|---|
| Part number | 50-6306 |
| UPC | 70000151509 |
| Transmission | GM TH350 4WD |
| Transfer case | NP231, 21-spline |
| Mainshaft | Not included |
Vehicle fitment
It fits the 1987–1989 Jeep Cherokee (XJ, Base, Chief, Laredo, Limited, Pioneer, Sport), the 1987–1989 Jeep Comanche and the 1987–1989 Jeep Wrangler (YJ).
Other Jeep models and other years, including the Wrangler TJ, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Transfer case adapters mount between the transmission and transfer case, so installation involves driveshaft and mount alignment; a driveline shop can confirm the fit. Disconnect the battery before starting any transmission work.
What’s included
The adapter kit described above.
Not included: the mainshaft, which the adapter does not include.









